LE TORRI NEL GRAFICO
-
@phaedrux forse non riesco a spiegarmi la distanza fisica dei fine corsa al piano di stampa per ciascuna torre risulta uguale con m666 x0 y0 z0 e stampa corretto (quindi se sono corretti i fine corsa ,perché mi corregge z 3.46 non può esserci un errore di 4mm . ma se lancio il g32 o g29 mi cambia sia la distanza fisica dei fine corsa al piano di stampa sia m666 =X-1.63 Y-1.84 Z3.46, e in piu' non stampa piu',la soda e' una BLTouch funziona correttemente. (
-
@rjenkinsgb said in LE TORRI NEL GRAFICO:
Kossel
ciao ho letto che hai fatto diversi progetti, ecco la mia domanda :nella progettazione di una delta Kossel che limiti si hanno dimensionalmente
-
@phaedrux CIAO CARO maximum size delta bed AND OF THE TOWERS MANAGED BY Duet3D WIFE, IT HAS LIMITS
-
@luca-massimiliano said in LE TORRI NEL GRAFICO:
@phaedrux CIAO CARO maximum size delta bed AND OF THE TOWERS MANAGED BY Duet3D WIFE, IT HAS LIMITS
I am not sure what you are saying.
-
@phaedrux using my Duet3D WIFE I would like to build a new delta printer, are there any size limits, for example the maximum height or the print radius, would I like to build a new delta printer?
-
Start by reading this. I am building Delta 1400 high 550 diameter.
-
@tecno thanks tecno my question: are there maximum size limits for the management of my Duet3D WIFE card?
-
@tecno GeoGebra dSim graphic simulato non riesco aprire scaricare i programmi dei vari simulatore tu quale usi ?simulated I can not open download the programs of the various simulator which one do you use?
-
If there are limits, they are likely higher than anything you intend to build as I've seen some real giants running Duets. How big are you planning to go?
-
@phaedrux THEY ARE IN THE INITIAL PHASE, BUT YOUR ANSWER IS IMPORTANT TO START TO DO THE PROJECT, I WOULD NEED I WOULD LIKE TO DOWNLOAD THE PROGRAMS OF THE VARIOUS SIMULATORS FOR DELTA CAN YOU INDICATE ME?
-
Sorry, but I don't understand what you're asking me for. I don't have any delta simulator software.
-
I would like to download an application for the kinematic simulation of a delta, in order to design one of this type https://www.geogebra.org/m/Br52nAjP this has size limits, it does not go beyond the delta radius 200 max
-
-
HERE is a link to a linear delta simulator with source so you can change the radius to what you need.
-
@alankilian
GRAZIE ALAN , MI POTRESTI INSEGNARE A SCARICARLO , C'E' UN MODO PARTICOLRE ? HO ALCUNI FILE NON RIESCO -
Go to that link, click on the "code" button and choose "Download ZIP"
Then unzip the file and you will see a list of files:
Read the "Readme_first.txt file to learn now to use OpenSCAD
You will need to download and install OpenSCAd and then double-click on the file Delta_simulator.scad to run the sinulator
-
@alankilian THANKS ALAN, I INSTALLED EVERYTHING. I TAKE THE OPPORTUNITY TO WISH YOU SERENE EASTER HOLIDAYS TO YOU AND TO ALL THE FRIENDS WHO HELPED ME. THANK YOU
