LIS3DH accelerometer to duet 3 mini 5+ wifi
-
How do I wire in a LIS3DH accelerometer to my duet 3 mini 5+ wifi? And what needs to be done on the firmware side to get input shaping going? Thank you in advance
-
-
Start reading here for physical connection:
https://docs.duet3d.com/en/User_manual/Connecting_hardware/Sensors_Accelerometer -
Look here for configuration
https://docs.duet3d.com/User_manual/Reference/Gcodes#m955-configure-accelerometer -
Use the inputshaping plugin to get visuals
https://forum.duet3d.com/topic/26447/inputshaping-plugin-0-2-0-pre8-2-released?_=1648338213765
-
-
@oliof yes I’ve read those and there still not making sense to me of what wire goes to what pin on the duet 3. The second pic of the purple accelerometer is the chip I’m using but the two row plug dosn’t really show well what the connections are
-
@ratrig0331 It tells you what pin on the accelerometer plugs into what pin on the Duet 3 Mini.
-
@dhusolo I think I have everything wired in right but when I do a m955 it says accelerometer not found
-
@ratrig0331 You need to define it before you can call it back with M955
-
@dhusolo I did a m955p0
-
@dhusolo and a M955 P0 C"io3.out+io3.in"