Duet3 1.0: using LASER/VFD and OUT9 connector at the same time

[morgoth90]

My plan is to have a generic connector to control varius tools with both 0-10v and pwm.
Is the out9 connector still outputting the pwm signal if the LASER/VFD connector is wired to a 0-10V module?

[dc42]

@morgoth90 said in Duet3 1.0: using LASER/VFD and OUT9 connector at the same time:

My plan is to have a generic connector to control varius tools with both 0-10v and pwm.
Is the out9 connector still outputting the pwm signal if the LASER/VFD connector is wired to a 0-10V module?

Yes.