Z axis probe failing to stop at end stop
-
Hi, I am new to Duet and I am having an issue with my printer. I am retrofitting a Duet 2 Wifi on a Creality CR6-se. I have an issue with the board seeming to ignore the z-axis stop. I have the sensor in the probe z input. I have the program built using the ender 3 program and added the z as a switch start. I have the switch working from the home screen when I press it goes to 1000 and when I let go it goes to 0. When it goes to probe for the z-axis it ignores the sensor and keeps going hitting the bed and I have to hit the power. Has anyone else had this issue? I have tried using no Z in the setup and it still ignores the z stop. How can I fix this?
-
@quinn said in Z axis probe failing to stop at end stop:
When it goes to probe for the z-axis it ignores the sensor
Hi,
What do you mean by that?
Endstops and Z probes serve different purposes. Are you homing Z using the endstop or trying to do so with the probe?
Frederick
-
@fcwilt I am trying to home to Z. It is not probing. I was following the setup guide when it was stating that I needed to use the probing pin, not the zstop pin.
-
I have the switch working from the home screen when I press it goes to 1000 and when I let go it goes to 0
What switch are you talking about in that statement?
Frederick
-
@quinn post your config.g and homing files so we can see what the printer is trying to so.
It's best if you post them as text using the code snippet tool (looks like </> and is two along from the bullet point button at the top when posting)
