Can c

peirof

Hi,

A question, I guess you can, but it's to confirm it. I have received the new printer that I am assembled, with a Duet v3 mini board , and to control the hot bed, use a relay.... This has given me food for thought.

A similar solution can be used to control the hotend heater cartridge... Feed it through a relay and be Duet who controls the relay.... If so:

Where could we find the wiring scheme?
What kind of relay would work

I know this wouldn't be necessary, but after the experiences you have passed, it's a way to add another layer of protection to the Duet board.

Thanks.

P. D. : happy new year to all! And I wish you that the new year comes loaded with impressions and without warping or over extrusion... With a well-calibrated pressure in advance... To be able to print Benchies and masks of squid game...

droftarts

Duplicate thread, of https://forum.duet3d.com/topic/26592/connect-through-a-relay
Locked.

Ian