Euclid probe kit with hardware in EU?

[Gixxerfast]

Anyone know if I can buy the Euclid probe kit including hardware from within EU?

[zapta]

@gixxerfast, you may want to check with @sinned6915, I think he is involved with it.

BTW, Steve from the Voron dev team had today a live episode where he installed an Euclid on Voron V2.4 https://www.youtube.com/watch?v=hpS2G_02OlQ

[sinned6915]

@gixxerfast thanks for your interest! we are working on EU reseller.

[zapta]

@sinned6915, I was watching this Euclid on Voron V2.4 video. The docking station mount at a fixed Z and requires the endstop switch? Why not on the rear beam of the gantry, like the Clicky, eliminating the need for the endstop switch?

https://www.youtube.com/watch?v=jMHCGlAa3Z8

[PaulHew]

I am getting the boards made by osh, I have ordered the special magnets
I can ship you a board, magnets and screws for magnets.
Will need a jst and microswitch or I can supply those as well.

I will be in France in 3 weeks time so can ship it from there to keep the postage costs down.

I am in the UK.

P.

[PaulHew]

@zapta said in Euclid probe kit with hardware in EU?:

@gixxerfast, you may want to check with @sinned6915, I think he is involved with it.

BTW, Steve from the Voron dev team had today a live episode where he installed an Euclid on Voron V2.4 https://www.youtube.com/watch?v=hpS2G_02OlQ

29mins in and he had put the magnets on the wrong side.....

[Gixxerfast]

@paulhew said in Euclid probe kit with hardware in EU?:

I can ship you a board, magnets and screws for magnets.

That would be really great, thanks Can I PM you here somehow with details? Not sure it's possible on the forum?

I've got switches and JSTs.

[jay_s_uk]

@paulhew got one spare?

[PaulHew]

@jay_s_uk I will have.
Magnets come thursday, boards whenever USPS gets them here!

I have a feeling I need to order more PCB's
I do have 100 pairs of magnet turning up....

I PM you guys.

[sinned6915]

@paulhew The Euclid license is Non-Commercial. Please do not resell my work.

[sinned6915]

@jay_s_uk DM and I will be happy to send you and gloomy official board and kits.

[PaulHew]

@sinned6915 Just as well I do not sell them. I give them away and charge postage.

[sinned6915]

@paulhew That goes agains the spirit of the license.

[zapta]

@paulhew said in Euclid probe kit with hardware in EU?:

29mins in and he had put the magnets on the wrong side.....

It's a live video so a significant social aspect (vs informative).

We should have similar videos for the Duet/RRF where dc42 edits config files with live user comments and donations.

[PCR]

@paulhew magnets here too! Can you PM me?

[PCR]

@sinned6915 the biggest problem is sadly the magnets in Europe....;(

[oliof]

@sinned6915 so you are saying it's against the license to give away the probe for free? That's an interesting interpretation of the CC-BY-NC-SA and proves once again that it's important to stick with OSI approved open source licenses that guarantee the four freedoms.

I guess I'll stay away from the Euclid probe then because you're basically saying I couldn't sell or give away for free a printer with the Euclid probe fitted on to it.

[PCR]

@oliof https://lukeslabonline.com/products/euclid-probe-kit?_pos=1&_sid=860330177&_ss=r

Hmm

[oliof]

@pcr doesn't matter, that could be under another direct agreement with sinned -- I am just reacting to what they wrote above.

[zapta]

@oliof, since it's not a patent, a new pcb design should address the copyright issue.

I am happy with the Clicky design which is simpler and pcb-less.