InputShaping-Plugin-0.2.0-pre5 released
-
Hi. I have the plugin running.
I had start-up problems because I had forgotten to update my toolboard to firmware 3.4b4.
I now get data that I have to deal with now.Thanks for the work you put in there.
-
@mfs12
Hello, I submitted a PR from github to support Simplified Chinese, you can take a look, if you have any questions, please let me know.
thanks -
@xiaok, this is very nice, thank you. I will get back to as soon as the plugin gets more production ready and the texts finalized.
-
@xiaok i didn't receive an PR.
-
@mfs12 Good morning, branch at inputshaping-accel-plugin
https://github.com/mfs12/DuetWebControl/pull/18 -
@mfs12 hi!
I've tested the plugin and its working nice.
can I suggest to have a automatic ringing test going trough the range 15-150 HZ with the option of changing in between NONE, ZVD, ZVDD EI2, EI3, minimum acceleration and the damping factor.
Thank you -
@SilviuZ, can you be more specific about the ringing test. what do you exactly mean by that?
-
something that can generate multiple auto tuning algorithms similar with below to find the perfect input shaping values in type, hz and damping values
0-ei3-dba218c3 1633266073427 1000 1356 0 ei3 25 0.1 800
1-ei3-dba218c3 1633266078416 1000 1356 0 ei3 26 0.1 800
2-ei3-dba218c3 1633266083309 1000 1353 0 ei3 27 0.1 800
3-ei3-dba218c3 1633266088439 1000 1361 0 ei3 28 0.1 800
4-ei3-dba218c3 1633266093576 1000 1357 0 ei3 29 0.1 800
5-ei3-dba218c3 1633266098567 1000 1356 0 ei3 30 0.1 800
6-ei3-dba218c3 1633266103563 1000 1366 0 ei3 31 0.1 800
7-ei3-dba218c3 1633266108571 1000 1356 0 ei3 32 0.1 800
8-ei3-dba218c3 1633266113494 1000 1356 0 ei3 33 0.1 800
9-ei3-dba218c3 1633266118404 1000 1359 0 ei3 34 0.1 800
10-ei3-dba218c3 1633266123400 1000 1363 0 ei3 35 0.1 800
11-ei3-dba218c3 1633266128449 1000 1356 0 ei3 36 0.1 800
12-ei3-dba218c3 1633266133376 1000 1356 0 ei3 37 0.1 800
13-ei3-dba218c3 1633266138590 1000 1363 0 ei3 38 0.1 800
14-ei3-dba218c3 1633266143640 1000 1359 0 ei3 39 0.1 800
15-ei3-dba218c3 1633266148722 1000 1353 0 ei3 40 0.1 800 -
@SilviuZ, a feature like this will come very likely.
-
New release was published. Check...
https://forum.duet3d.com/topic/25515/inputshaping-plugin-0-2-0-pre6-released/1