Possible to add unique ID to 1LC or modify Name

Marcossf

Same here, our several 1XD and 1LC didn't show the Bootloader ID. We identify the board by their Can ID adjusting the settings according that CAN number, but having a GUID could be advantageous to have same tool Can ID but some different settings or attibutes.

dc42

@marcossf if you run M409 K"boards" does it show the board unique IDs? I'm away from the office right now so I can't check.

T3P3Tony

@quentinle thanks for confirming this. I have moved this to the firmware wishlist.

dc42

@marcossf currently the only way you can find the unique ID of expansion boards is to send M122 B# P1 where # is the CAN address of the board.

The bootloader version will show as "not available" in the M122 report if the bootloader is an old version.

Marcossf

@dc42 Ok, found it out.

M409 K"board" in this case M409 K40 on a 1XD boards gives this output:

M409 K40
{
    "key": "",
    "flags": "",
    "result": {
        "boards": [
            {},
            {},
            {},
            {},
            {},
            {},
            {},
            {},
            {},
            {}
        ],
        "directories": {},
        "fans": [],
        "global": {},
        "heat": {},
        "inputs": [
            {},
            {},
            {},
            {},
            {},
            {},
            {},
            {},
            {},
            {},
            {},
            {}
        ],
        "job": {},
        "limits": {},
        "move": {},
        "network": {},
        "sensors": {},
        "seqs": {},
        "spindles": [
            {},
            {}
        ],
        "state": {},
        "tools": [
            {},
            {},
            {}
        ],
        "volumes": [
            {}
        ]
    }
}

Same with a 1LC:

M409 K20
{
    "key": "",
    "flags": "",
    "result": {
        "boards": [
            {},
            {},
            {},
            {},
            {},
            {},
            {},
            {},
            {},
            {}
        ],
        "directories": {},
        "fans": [],
        "global": {},
        "heat": {},
        "inputs": [
            {},
            {},
            {},
            {},
            {},
            {},
            {},
            {},
            {},
            {},
            {},
            {}
        ],
        "job": {},
        "limits": {},
        "move": {},
        "network": {},
        "sensors": {},
        "seqs": {},
        "spindles": [
            {},
            {}
        ],
        "state": {},
        "tools": [
            {},
            {},
            {}
        ],
        "volumes": [
            {}
        ]
    }
}

If query with a M122 B40 P1 it shows the GUID right:

1XD:

m122 b40 p1
MCU temperature reading OK (25.8C)
VIN voltage reading OK (24.4V)
All checks passed
Board ID: SF2PJ-GDA7A-N25J0-40KM4-LNS2Z-76T99

1LC:

	m122 b20 p1
MCU temperature reading OK (34.6C)
VIN voltage reading OK (23.8V)
Driver status OK
All checks passed
Board ID: 4DXBX-8KANL-M25J0-401GQ-1V40Z-RKLP5

Updating a toolboard to new version, also updates their bootloader, isn't it?

Thanks David

jay_s_uk

@marcossf the bootloader update is a separate command.
e.g. M997 B40 S3

Marcossf

@jay_s_uk Ok, thank you!

QuentinLe

@dc42 said in Possible to add unique ID to 1LC or modify Name:

M122 B# P1

Thanks for your reply => M122 B# P1 working like a charm in my case

dc42

@marcossf it's M409 K"boards" (plural) to get the complete board info. However I have checked and the unique ID is not included. I have added a work item to add the unique ID to the object model.

Marcossf

@dc42 Ok, undestood. Thanks David.

dc42

@marcossf this is now implemented and will be in the next 3.4 beta release.