Magnetic Monitor availability
-
Hello all. I’ve been looking for a months now to get one of the magnetic filament monitors but haven’t been able to find them. They seem to be a myth at this point
Any ideas? I’m willing to print the housing for it if only the PCBs are available.Thanks!
-
@nightlonk42 we’ve had some supply problems with the SLS printed housing. I think you are in the USA, so Filastruder may have bare boards; @elmoret ?
Ian
-
@droftarts said in Magnetic Monitor availability:
@nightlonk42 we’ve had some supply problems with the SLS printed housing. I think you are in the USA, so Filastruder may have bare boards; @elmoret ?
Ian
I am. And that would be perfect! I have an sla printer and can easily do those myself.
The site shows out of stock but I’m hoping I can get just the board when they see this post -
@nightlonk42 I've been waiting on them for about a year now and unfortunately, last time I talked to Filastruder, they had no parts at all. I also wanted to SLA print my own housing but they didn't have any electronics.
-
@iff7378
I was able to purchase the electronics board from Filastruder, but they had none of the housings or moving parts. -
@gamefanatic3d we are having new moving parts made with stronger magnets so that the separation between the magnet and the sensor is less critical. Then it will be easier to use FDM printed housings. @T3P3Tony may be able to provide an update on expected availability.
-
@dc42 That sounds great! Definitely looking to get my hands on a couple of them.