Help / thoughts on how to implement a second chamber heater
-
My apologies if this is posted in the wrong category but I’m here to inquire about how difficult would it be to alter the firmware code to allow the use of a second chamber heater for someone who knows only enough to be dangerous?
The problem: Im currently running a liquid cooled dual extruder/ stepper motor setup inside a heated chamber which is typically running at 100-150C. I’ve noticed lately that the return temperatures out of a 120x360 cooler are coming back pretty hot < 100F. Long story short, I removed the 360 cooler and replaced it with a chiller I made which is currently running extremely well @ 65F off a remote thermostat. I’d really like to be able to Integrate the chiller into the DWC with the same functionality as the chamber heater. My thoughts are that all the safety and limit features would directly apply in nearly all the same ways, so theoretically the only change would be is to allow multiple chamber heaters. Any feedback is greatly appreciated.
-
Just to link it back to the other thread: https://forum.duet3d.com/topic/23317/help-with-adding-a-second-chamber-heater-to-dwc/3
