Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    PANEL CONTROL DUET WIFE

    Scheduled Pinned Locked Moved Solved
    General Discussion
    3
    36
    1.4k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • droftartsundefined
      droftarts administrators
      last edited by

      @luca-massimiliano if you mean the gcode 3D view? It should be built-in in DWC 3.2.2, you just need to enable it. See https://duet3d.dozuki.com/Wiki/Duet_Web_Control_v2_and_v3_(DWC)_Manual#Section_Plugins_tab_built_in

      Ian

      Cartesian bed-slinger with Duet 3 Mini 5+ WiFi and 1LC : RRP Fisher Delta v1 with Duet 2 Maestro : TronXY X5S with Duet 3 MB6HC and Roto toolboard

      luca Massimilianoundefined 2 Replies Last reply Reply Quote 0
      • luca Massimilianoundefined
        luca Massimiliano @droftarts
        last edited by

        @droftarts
        perfetto risolto mole grazie. buona serata

        luca Massimilianoundefined 1 Reply Last reply Reply Quote 1
        • luca Massimilianoundefined
          luca Massimiliano @luca Massimiliano
          last edited by

          This post is deleted!
          1 Reply Last reply Reply Quote 0
          • luca Massimilianoundefined
            luca Massimiliano @droftarts
            last edited by

            @droftarts
            buonasera
            ho un problema config g
            ; Riscaldatori
            M308 S0 P "termistore" Y "T100000 B3950; configurare il sensore 0 come termistore sul pin bedtemp
            M950 H0 C "bedheat" T0; crea l'uscita del riscaldatore del letto sul riscaldamento del letto e mappala al sensore 0
            M307 H0 B1 S1.00; abilitare la modalità bang-bang per il riscaldatore del letto e impostare il limite PWM
            M140 H0; mappa piano riscaldato su stufa 0
            M143 H0 S120; limite di temperatura impostato per il riscaldatore da 0 a 120C
            M308 S1 P "e0temp" Y "termistore" T100000 B4388; configurare il sensore 1 come termistore sul pin e0temp
            M950 H1 C "e0heat" T1; crea l'uscita del riscaldatore ugello su e0heat e mappala al sensore 1
            M307 H1 B0 S1.00; disabilitare la modalità bang-bang per il riscaldatore e impostare il limite PWM
            M143 H1 S280; limite di temperatura impostato per il riscaldatore 1 ... 280C
            M308 S2 P "e1temp" Y "termistore" T100000 B4388; configurare il sensore 2 come termistore sul pin e1temp
            M950 H2 C "e1heat" T2; crea l'uscita del riscaldatore ugello su e1heat e mappala al sensore 2
            M307 H2 B0 S1.00; disabilitare la modalità bang-bang per il riscaldatore e impostare il limite PWM
            M143 H2 S280; impostare il limite di temperatura per il riscaldatore 2 a 280C

            sensore
            di temperatura sensore di temperatura 100KΩ precisione di ± 1%. NTC 3950
            cartuccia 12 V, potenza: 40 W. fino 280 g
            comando:
            M303 H1 P1 S260
            M98 P "0: / macro / RISCALDATORI / HEATER 1"
            Auto tuning riscaldatore 1 con temperatura target 260.0 ° C e PWM 1.00 - non lasciare stampante incustodita
            risultato:
            Sintonizzazione automatica annullata perché la temperatura target non è stata raggiunta

            Phaedruxundefined 1 Reply Last reply Reply Quote 0
            • Phaedruxundefined
              Phaedrux Moderator
              last edited by

              What does the heater graph in DWC look like when tuning?

              Z-Bot CoreXY Build | Thingiverse Profile

              luca Massimilianoundefined 1 Reply Last reply Reply Quote 0
              • luca Massimilianoundefined
                luca Massimiliano @Phaedrux
                last edited by

                @phaedrux
                8b83a9a1-dcb1-40e0-b932-bc76aa5c5def-image.png

                1 Reply Last reply Reply Quote 0
                • Phaedruxundefined
                  Phaedrux Moderator @luca Massimiliano
                  last edited by

                  @luca-massimiliano said in PANEL CONTROL DUET WIFE:

                  M308 S1 P "e0temp" Y "termistore" T100000 B4388;

                  If your thermistor is NTC 3950 your B value in M308 is incorrect. Change from B4388 to B3950 for both your heaters that use that NTC thermistor.

                  Z-Bot CoreXY Build | Thingiverse Profile

                  luca Massimilianoundefined 2 Replies Last reply Reply Quote 0
                  • luca Massimilianoundefined
                    luca Massimiliano @Phaedrux
                    last edited by

                    @phaedrux cambiato
                    provo subitio

                    1 Reply Last reply Reply Quote 0
                    • luca Massimilianoundefined
                      luca Massimiliano @Phaedrux
                      last edited by

                      @phaedrux
                      perfetto ma dove trovo la comparazione tra NTC 3950 o altri i comando m308 b 3950 NTC thermistor

                      Phaedruxundefined 1 Reply Last reply Reply Quote 0
                      • Phaedruxundefined
                        Phaedrux Moderator @luca Massimiliano
                        last edited by

                        @luca-massimiliano said in PANEL CONTROL DUET WIFE:

                        @phaedrux
                        perfetto ma dove trovo la comparazione tra NTC 3950 o altri i comando m308 b 3950 NTC thermistor

                        perfect but where do I find the comparison between NTC 3950 or other i command m308 b 3950 NTC thermistor

                        I dont understand the question as translated.

                        Z-Bot CoreXY Build | Thingiverse Profile

                        luca Massimilianoundefined 1 Reply Last reply Reply Quote 0
                        • luca Massimilianoundefined
                          luca Massimiliano @Phaedrux
                          last edited by

                          @phaedrux
                          il secondo se
                          mbra non andare

                          M308 S1 P"e0temp" Y"thermistor" T100000 B3950 ; configure sensor 1 as thermistor on pin e0temp
                          M950 H1 C"e0heat" T1 ; create nozzle heater output on e0heat and map it to sensor 1
                          M307 H1 B0 S1.00 ; disable bang-bang mode for heater and set PWM limit
                          M143 H1 S280 ; set temperature limit for heater 1 to 280C
                          M308 S2 P"e1temp" Y"thermistor" T100000 B3950

                          1 Reply Last reply Reply Quote 0
                          • Phaedruxundefined
                            Phaedrux Moderator
                            last edited by

                            the second if
                            mbra not go

                            M308 S1 P"e0temp" Y"thermistor" T100000 B3950 ; configure sensor 1 as thermistor on pin e0temp
                            M950 H1 C"e0heat" T1 ; create nozzle heater output on e0heat and map it to sensor 1
                            M307 H1 B0 S1.00 ; disable bang-bang mode for heater and set PWM limit
                            M143 H1 S280 ; set temperature limit for heater 1 to 280C
                            M308 S2 P"e1temp" Y"thermistor" T100000 B3950

                            I still do not understand.

                            Z-Bot CoreXY Build | Thingiverse Profile

                            luca Massimilianoundefined 1 Reply Last reply Reply Quote 0
                            • luca Massimilianoundefined
                              luca Massimiliano @Phaedrux
                              last edited by

                              @phaedrux said in PANEL CONTROL DUET WIFE:

                              B3950

                              niente da fare , domani cambio thermistor e riscaldatore , potrebbe avere un mal funzionamento grazie ti aggiorno domani

                              1 Reply Last reply Reply Quote 0
                              • Phaedruxundefined
                                Phaedrux Moderator
                                last edited by

                                Are you saying that changing it to B3950 did not help the tuning complete?

                                Can you show a photo of the hotend? Possibly there is a problem with the assembly keeping it from reaching the expected temp.

                                Have you tried tuning to a lower temp that it is able to reach?

                                Z-Bot CoreXY Build | Thingiverse Profile

                                luca Massimilianoundefined 1 Reply Last reply Reply Quote 0
                                • luca Massimilianoundefined
                                  luca Massimiliano @Phaedrux
                                  last edited by

                                  This post is deleted!
                                  1 Reply Last reply Reply Quote 0
                                  • luca Massimilianoundefined
                                    luca Massimiliano @droftarts
                                    last edited by

                                    @droftarts
                                    ho un altro problema il config. g non lo trovo , posso ricavarlo con un comando cosi' da ottenere i valori salvati nella memoria? o solo importarlo e perderli
                                    c9959c24-c497-4f3a-b48c-dfa595991fc2-image.png

                                    droftartsundefined 1 Reply Last reply Reply Quote 0
                                    • luca Massimilianoundefined
                                      luca Massimiliano @droftarts
                                      last edited by

                                      @droftarts
                                      dinuovo cancellati i dati sulla scheda ssd provo a comprarne una nuova

                                      droftartsundefined 1 Reply Last reply Reply Quote 0
                                      • droftartsundefined
                                        droftarts administrators @luca Massimiliano
                                        last edited by

                                        @luca-massimiliano First, click 'Refresh' and check to see if reappears. If you have just edited and saved it, the directory listing may need to update.

                                        If it has been deleted, you should be able to get back to the previous version by using the config.g.bak file, which is a backup, so long as you have not turned off the Duet. If you have turned off the Duet, you will need to do the following on a PC, as the Duet will not start up and join the network without a config.g file.

                                        Open the config.g.bak file, select all, copy, then close the file. Select 'New File' (in DWC) or create a new text file (on PC) called config.g and paste the contents into it. Save it to the /sys folder.

                                        Ian

                                        Cartesian bed-slinger with Duet 3 Mini 5+ WiFi and 1LC : RRP Fisher Delta v1 with Duet 2 Maestro : TronXY X5S with Duet 3 MB6HC and Roto toolboard

                                        1 Reply Last reply Reply Quote 0
                                        • droftartsundefined
                                          droftarts administrators @luca Massimiliano
                                          last edited by

                                          @luca-massimiliano said in PANEL CONTROL DUET WIFE:

                                          @droftarts
                                          again deleted the data on the ssd card I try to buy a new one

                                          Oh. Now the question is why the config.g file disappeared. Did you delete it? Or did it disappear after editing? There have been a couple of other threads where the config.g file has disappeared, and may be caused by a malfunctioning SD card socket. As you had problems early on with corrupt www folder, perhaps this is the problem? Please have a look at the SD card socket and compare with https://duet3d.dozuki.com/Wiki/SD_Card#Section_SD_Card_Socket

                                          Ian

                                          Cartesian bed-slinger with Duet 3 Mini 5+ WiFi and 1LC : RRP Fisher Delta v1 with Duet 2 Maestro : TronXY X5S with Duet 3 MB6HC and Roto toolboard

                                          luca Massimilianoundefined 2 Replies Last reply Reply Quote 0
                                          • luca Massimilianoundefined
                                            luca Massimiliano @droftarts
                                            last edited by

                                            @droftarts
                                            come ti dicevo vorrei cambiare la scheda cmq la verivico come hai detto tu
                                            p0i ha sesso di connettersi , e ho rifatto il prcedimento va.

                                            ma un problema vede solo un heater ;
                                            Heaters
                                            M308 S0 P"bedtemp" Y"thermistor" T100000 B3950 ; configure sensor 0 as thermistor on pin bedtemp
                                            M950 H0 C"bedheat" T0 ; create bed heater output on bedheat and map it to sensor 0
                                            M307 H0 B1 S1.00 ; enable bang-bang mode for the bed heater and set PWM limit
                                            M140 H0 ; map heated bed to heater 0
                                            M143 H0 S120 ; set temperature limit for heater 0 to 120C
                                            M308 S1 P"e0temp" Y"thermistor" T100000 B3950 ; configure sensor 1 as thermistor on pin e0temp
                                            M950 H1 C"e0heat" T1 ; create nozzle heater output on e0heat and map it to sensor 1
                                            M307 H1 B0 S1.00 ; disable bang-bang mode for heater and set PWM limit
                                            M143 H1 S280 ; set temperature limit for heater 1 to 280C
                                            M308 S2 P"e1temp" Y"thermistor" T100000 B3950 ; configure sensor 2 as thermistor on pin e1temp
                                            M950 H2 C"e1heat" T2 ; create nozzle heater output on e1heat and map it to sensor 2
                                            M307 H2 B0 S1.00 ; disable bang-bang mode for heater and set PWM limit
                                            M143 H2 S280

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA