PanelDue gives a blank white screen
-
My PanelDue was working fine, then a spool fell off the spool holder and hit the back of it, now it only shows a white screen.
I tried erasing and reloading the firmware on it.
I have the 1.1 version on a 7 inch display.
any ideas on what to try?
-
As you have re-flashed the firmware, it should be displaying the "Touch the spot" screen. Does it bleep when you touch it in the right places?
-
i re-flashed the firmware and still get just a white screen, nothing about touching the spot, no beeps if i touch the screen
-
ok, if i randomly start pressing all over the screen every once in a while i get a beep, but thats all that has happened so far
-
I figured out the problem. It appears that when the spool hit the screen it knocked a component right off the back. looks like a capacitor or something, a raised oval with a 10,000 written on it, found that when i was working on the printer last night.
-
Can you post a photo?
