Selectable colours for additional Temp sensors

[PaulHew]

I have just added a Chamber temp sensor into my build area.
The colours I have are Red for the Mosquito, Orange for Bed-Top and a mix of orange/reddy colour for the Chamber. Blue for the Bed.
So apart from the Bed, they are all a similar colour

Would be nice to be able to define a colour.

I run Klipper/MainSail on a smaller printer and in the Mainsail interface you can select the colour for each of the sensors.

Regards,
Paul

[dc42]

@paulhew is this a request for DWC or for PanelDue?

[PaulHew]

@dc42 DWC.
I look at the Duet EcoSystem as a whole......
So its a DWC request?

[dc42]

@paulhew thanks, I'll move it to the DWC wishlist.