Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    3D printer Super-GAU

    Scheduled Pinned Locked Moved
    Off Topic
    3
    4
    226
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • o_lampeundefined
      o_lampe
      last edited by

      IDK how I managed to screw up my printer-coords, but I've 'succesfully' disassembled my ballscrews. 😢
      ballscrew.jpg
      The Z-axis just went up_and_up....
      Will take a while, before I'm up and running again...

      CU
      Olaf

      Alex.crundefined 1 Reply Last reply Reply Quote 0
      • Phaedruxundefined
        Phaedrux Moderator
        last edited by

        Rapid Unscheduled Disassembly.

        Z-Bot CoreXY Build | Thingiverse Profile

        1 Reply Last reply Reply Quote 3
        • Alex.crundefined
          Alex.cr @o_lampe
          last edited by

          @o_lampe

          Bummer. Hopefully your teardown and rebuild isn't too bad.

          Voron2.4/Duet3 SBC+6HC+3HC+1LC+1HCL(x2) - Delta/Duet2 Wifi - CubePro/Duet2 Wifi+Duex5 - Laser/Duet3 Mini5+ - Cel Robox - U̶p̶3̶0̶0̶+/D̶u̶e̶t̶3̶ ̶6̶H̶C̶+̶LC1̶ - F̶T̶-̶5̶/̶D̶u̶e̶t̶2̶ ̶W̶i̶f̶i̶ - S̶o̶l̶i̶d̶o̶o̶d̶l̶e̶

          o_lampeundefined 1 Reply Last reply Reply Quote 0
          • o_lampeundefined
            o_lampe @Alex.cr
            last edited by

            @alex-cr
            The ballscrews are already back in place, but I took the chance to rethink my bed mounting and ordered a longer GT2 belt. I want to place the ballscrews outside the printhead-area.

            It has to get worse, before it gets better, they say...

            1 Reply Last reply Reply Quote 1
            • First post
              Last post
            Unless otherwise noted, all forum content is licensed under CC-BY-SA