M17 Gcode Activate motor power?
-
Is there any Gcode to activate the motors without making a home, like the M17?
-
M17 is implemented in 3.3 beta 1 according to the release notes:
https://github.com/Duet3D/RepRapFirmware/wiki/Changelog-RRF-3.x-Beta-&-RC -
I have RepRapFirmware for Duet 2 WiFi / Ethernet 3.2.2
Could I update to 3.3 without problems? -
That is hard to say, it is a beta afterall. But you can always downgrade again if things doesn't work for you.
-
You could also send a G1 move with a very very small distance.
-
@Phaedrux said in M17 Gcode Activate motor power?:
You could also send a G1 move with a very very small distance.
Yes, Ok, if it is currently how I have it with a G1.
Tk