Want to add my own start screen Duet2 wifi

Veti

what part are you stuck at?

uneumann36

I totally don´t understand this :

There is a tool included in Tools/gobmp2c/(linux|macos|win) containing pre-compiled binaries for the three major operating systems. It's a command-line tool and can be used like follows:

$ ./bmp2c --help
Usage of ./bmp2c:
-binary
Binary output
-outfile string
Output file. The default is to output to stdout. (default "-")
Use the -binary parameter to create splash screen and append it like this to the compiled firmware binary and provide the name of the input file as the last parameter e.g.

bmp2c -binary -outfile mysplashscreen.bin mysplashscreen.bmp
On Windows: Run this Windows command to append it to the binary: copy /b PanelDue-v3-5.0-nologo.bin+myimage.bin PanelDueFirmware.bin

uneumann36

It´s like
Egypt pyramids ....... Laugh

uneumann36

Also, is there to modified the Panel Software or the Duet Board Software?

Veti

did you download the software?

https://sourceforge.net/projects/bmp2c/

you have to then start a command console

and execute the command in the folder where the bmp2c.exe is

Veti

also see
https://www.bleepingcomputer.com/tutorials/windows-command-prompt-introduction/

uneumann36

Sounds like to create an atomic reactor for me.

uneumann36

Hope somebody can help me

Phaedrux

https://github.com/frank26080115/PanelDueSplashMaker

Give that a shot. It should help automate the process a bit.

uneumann36

@Phaedrux
Again thank you very much for your help.

It was not easy to find the right size (KB) for the start screen!

So i am very proud to introduce you my big Printer "Silent Goliath"

And also my start Screen :

Thank you guys !

zapta

@uneumann36, I like your Never button.

uneumann36

@zapta
Because for example i phone my wife to do this or this on the printer, she see the "Never" button! Lol.