Printing Size 500 x 500 x 700 mm

@Phaedrux

So , i want to tell some things about this forum and you!

I am so happy to get this kind of great support, this is absolute wonderful.
I am a technician in technical support worldwide, but you, this is great.
And all this support is free of charge!
Thank you verry verry much!!!!

But i know thank you is not all!
Please let me know how i can aid you and this forum.

Special Thank`s from germany.

@Phaedrux
Again thank you very much for your help.

It was not easy to find the right size (KB) for the start screen!

So i am very proud to introduce you my big Printer "Silent Goliath"

And also my start Screen :

Thank you guys !

Hey Guys

So i will report that my printer is working very well now!
It seem my problems caused on a wrong Software on the Panel.

A very big Thank you to all of you for your help!

@engikeneer

Dear Engikeneer , dear Phaedrux and all other helpers.

It works, and i am so happy.
Wow , at the end it was easy when you know how it works.

Also thank you Engikeneer for your great tip to use Prusa Slicer.
It is very good, and i will use it ever.

Attached my first automatic colored print via Prusa Slicer and my updated Ender5Duet 3 in 1 out printer.

This Forum is great.

Yeah, it works!

I do not know why it also work in the past.

Anyway, thank you !

@o_lampe
Verry good, Thank you.
But in the manual i found they use a Bigtreetech SKR 2 board with ESP8266 WiFi Module
Not a duet board!
Or is this board the same?

@dc42
Hey DC
Thank you for your reply.
No Problem for me to buy a Duet3 Board.
I already have one for my 3D Printer, and i am happy with it!

The reason why i want to use a Duet Board is i am totally happy with Duet , the Forum, and your great Support. Also the possibilitys of Duet Boards are very good.

So is a manual how to use a board for K40 and or how to set it?

Cheers
Uwe

Does anyone know if this is possible?

Hello my friends

So, i got a new hobby, yes i buy a Laser Engraver Model K40.
I search in this Forum for Information, but i found different information´s but not really understandable for me.
Because this programming stuff is not my favorite.

In the past i build my own 2 3D printers with Duet Hardware.
So i understand this hardware now, and i like Duet Hardware and support! You all are very good.

I already updated and upgraded my K40 with different things.
So i add the mini gerbil on this printer use Lightburn and so on.
It make a lot of fun to work with the K40.
And important! My wife is happy to about the results. ( Happy wife happy life)

So my Question is, is it possible to use an Duet Board instead of the original Board or the Mini Gerbil Board???
Because the connection and possibility’s of Duet Boards are much better and i like Duet.
I need to know if there is a good working solution to use a Duet or what kind of Duet?

Hopefully i get some feedback from you.

Regards
Uwe

@dc42
Thank you DC , now i understand why this happens now !

Yeah, it works!

I do not know why it also work in the past.

Anyway, thank you !

@jay_s_uk
Thank´s , i will try it.
But i never change the end code, and it works in the past !

@jay_s_uk

Ok, here is my cura start code :

M80
G28 ;Home
G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up
G1 X5.1 Y20 Z0.28 F5000.0 ;Move to start position
G1 X5.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line
G1 X5.4 Y200.0 Z0.28 F5000.0 ;Move to side a little
G1 X5.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line
G92 E0 ;Reset Extruder
G1 E4 F300 ; Extrude 4mm of Filament
G1 Z2.0 F3000 ;Move Z Axis up

And here the end code :

M104 S0
M140 S0
;Retract the filament
G92 E1
G1 E-1 F300
G28 X0 Y0
M84
M190 R50.000000
M81 abschalten ; Herunterfahren Netzteil

Hope this helps to identify my problem.

I am just at work.
So something like - set bed temp to 50 degress , if reached M81
I don´t changed settings (start and endcode) it is since a half year same.
But since 2 weeks i get this failure message.

If print is ending, extruder drive home, bed temp setting goes to 50 degress, if 50 degrees is reached the failure above is coming.

Hi, is there anyone who knows the cause?