What firmware version are you using?

[zapta]

Upgrade level among the people that answer is very high. I wonder how well it represents the entire Duet user base.

[A Former User]

@zapta said in What firmware version are you using?:

Upgrade level among the people that answer is very high. I wonder how well it represents the entire Duet user base.

Yep - could be some statistic magic: The "have the latest & greatest firmware" people maybe just coincidally are the same ones that seem to hang out in the forum and read the latest blog-entries

[JuJuDelta]

Kossel XL+ Duet2 WiFi Firmare 3.2
CNC Test Bed 12 steppers Duet3 Firmware 3.2 RPi SBC
CNC Test Bed 12 steppers Duet3 spare/development Firmware 3.3 RPi SBC or standalone

[weed2all]

Im using 2.05 on all my duet wifi and 3.2 on my duet 3 board

[TypQxQ]

Waiting for 3.3 beta with new DSF beta for my Duet3 and running 3.2 as voted. I think many of us are waiting for that...
Running 2.05 on my Duet2WiFi.

[Daniel]

3.2 with Duet 2 Wifi and Duet 5 as extension. Railcore II 300 ZL configuration.

[oliof]

2.0.5 on the CR-IDEX,
3.2.2 on the V-Core Pro,
3.2 on the Newmerod,
3.2.2 on the miniMIR,
3.2beta on the Colinear Tripteron.

(the latter three are incomplete at the moment).

[lui2004]

On my Ender 5 with Duet Wifi on 3.2

[alankilian]

How do I change my vote to undo 2.5 and check 3.2 since I updated my SeeMeCNC Rostock Max V3.2 yesterday?

[XTL]

My ender5 was down for a long time since the head got encased in plastic. I bought some new hotends and finally got it running again. Haven't had time to upgrade to v3 yet. I just want to get printing first.

[BlueDust]

2.05 v-Core Pro (Duet2)
3.2 v-Cast IDEX (Duet3) - Work in progress
voted 3.2

[Quadcells]

Want to switch to RRP 3.1 for my delta and Railcore II just haven't got around to it..a little weary.

[Frederik]

at the moment i´m really happy with the new 3.3beta1. Especially the new Function to Tune Heaters connected to Toolboards

[fcwilt]

@Frederik said in What firmware version are you using?:

at the moment i´m really happy with the new 3.3beta1. Especially the new Function to Tune Heaters connected to Toolboards

You're a brave man - I guess it comes from having a great name.

Frederick

[Frederik]

@fcwilt

[zapta]

I am on 3.1.1 (2020-05-19b2).

Does duet3d have any recommendation on what version we should use if want long term support without having to upgrade to each new release?

[oliof]

there is no LTS release. The recommendation so far always was to use the latest stable release (i.e. 3.2.2 right now). In practice, if you are on a release that works for you, there is no need to update. Unless there is (-:

[martin7404]

On a modified China corexy I run 2.05 and on new Muldex build yesterday 3.11, today 3.2 and at the moment rolling back as far 3.2 have major issues with tool change on my IDEX

[Phaedrux]

@zapta said in What firmware version are you using?:

I am on 3.1.1 (2020-05-19b2).

Does duet3d have any recommendation on what version we should use if want long term support without having to upgrade to each new release?

Ride the wave!

[zapta]

@Phaedrux said in What firmware version are you using?:

Ride the wave!

My printer is pretty stable and useful these days so my focus shifted from the printer itself to what I am creating with it.