Crazy ?, can you configure a pop up on Duet Web Control

Jaw8850

Looking at Test_Fans Macro in Duet 3.2 firmware. I am running sensorless homing so I don't have an X endstop to trigger the test. Is there a way to configure a pop up either on my Panel Due or on DWC to click and activate the trigger? Or hitting an existing button on DWC or PanelDue to accomplish the same thing.

Phaedrux

You probably shouldn't run those macros as they came from the factory test.

But that is an interesting question on how to trigger a stall guard axis... Hmm..

Jaw8850

@Phaedrux
Yeah didn't want to run that test but thought it would be cool if I could activate a fan test and then have a pop up box to click OK on and that would trigger the next step etc. Was just thinking while my bed leveling was running lol.

https://duet3d.dozuki.com/Wiki/Gcode#Section_M291_Display_message_and_optionally_wait_for_response

Might work?