PanelDueFirmware 3.2.2 released

Caveman

3.2 beta3

wilriker

@Caveman Can you please flash PanelDueFirmware again and see if this problem still exists?

Also please make sure that the baud rate you configured on your Duet with M575 matches the baud rate set on your PanelDue. And of course that you enabled the Aux port via M575 in the first place.

If that still does not work please connect a USB cable to your Duet, connect via serial terminal (if necessary see guide for initial Duet setup for instructions on how to do that) and issue

M111 P3 S1

You should see M409 commands coming in on channel Aux.
Run

M111 P3 S0

before disconnecting USB.

If you don't please return here and provide your config.g as well as the output of M122.

Caveman

Fixed with a reflash, strange tried that also yesterday but did not work. Fixed for now! thanks

Exerqtor

@wilriker said in PanelDueFirmware 3.2.2 released:

I am pleased to announce the release of PanelDueFirmware 3.2.2. Please excuse the inconvenience with broken 3.2.1.

New and changed features:

Provide interface for RepRapFirmware to reset as well as erase and reset the PanelDue

Does this mean updating PanelDue firmware will be possible via DWC down the road?

wilriker

@Exerqtor said in PanelDueFirmware 3.2.2 released:

Does this mean updating PanelDue firmware will be possible via DWC down the road?

I am working on that. But due to hardware limitations it will only work for v3 boards and 5i/7i. So much limitation I can already put forward.

Exerqtor

@wilriker
Sweet! Given how cheap the V3 boards are it's not unobtainable for anyone atleast

cgcafer

Hi,
I have a problem about on screen keyboard. I pressed any letter but no any visible feedback. When i close and re open keyboard all pressed letter can visible.
My board V3 and 7"

wilriker

@cgcafer Thanks for reporting. I can reproduce this issue. Actually that's a bug I already fixed in one of the 3.2.0 RCs but it seems to have returned.

cgcafer

Thanks for your answer, i have also another problem that is about V2 board and 5"LCD.
it has no problem with V1.24 but not V3.2.2. It seems to like about lcd timing problem.

wilriker

@cgcafer I found the bug with the command input (actually a different problem to what I fixed in the RCs) and fixed it. I will release this probably later today.

it has no problem with V1.24 but not V3.2.2. It seems to like about lcd timing problem.

Can you explain that with a bit more detail, please?

cgcafer

https://drive.google.com/file/d/1JUmpmnN39RU9hgvowxu67gGC0sFneF2J/view?usp=sharing
https://drive.google.com/file/d/1BLFRYAHmChkUitGM5Tn8wXyLXaf9cAyy/view?usp=sharing
All V3 same result

Exerqtor

I can also atest for the on screen keyboard acting up. If i write something it won't show up unless i hit backspace.

wilriker

@Exerqtor Thanks, I found and fixed that. I am right now working on improving overall update rate and will then release a new version.

wilriker

@cgcafer said in PanelDueFirmware 3.2.2 released:

https://drive.google.com/file/d/1JUmpmnN39RU9hgvowxu67gGC0sFneF2J/view?usp=sharing
https://drive.google.com/file/d/1BLFRYAHmChkUitGM5Tn8wXyLXaf9cAyy/view?usp=sharing
All V3 same result

Thanks for reporting. I will analyze this issue but it may take a while. Sorry, I cannot give you a more short-term answer.

wilriker

I have now released PanelDueFirmware 3.2.3. Please continue in this thread.

wilriker

@cgcafer Please check the latest release of PanelDueFirmware 3.2.4 if that fixes your issues on your V2 board.