Enable debugging for all modules

TypQxQ

Running on Duet3+RPi4 6HC+3HC with tools on 3HC. 3.2b3 but saw same behavior in 3.1.1.

The manual states the following:
"If the optional 'P' parameter is not specified, debugging will be enabled for all modules."

But I get this:

M111 S1
Use P parameter to specify which module to debug

It this a change not reflected in the documentation?

dc42

Yes, the documentation was out of date. I have corrected it. Thanks for pointing this out.

Enabling debugging for all modules is no longer useful because of the very large amount of output it produces.