Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Random Pause During Print... Bug?

    General Discussion
    2
    2
    138
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • jnofsingerundefined
      jnofsinger
      last edited by jnofsinger

      Hello I have the current setup
      Duet Wifi 1.01 with RRF3.1.1

      I have printed 2 versions of a file this one is ABS centric, 15% infill, no fan, bed 90 and hotend at 240. it is the circle fidget cube thing. bad gcode file

      What happens the hotend stops over the last printed spot, everything still on at 90 and 240 temperatures. The stepper motors barely move like the belt is very loose. (X and Y). I need to power cycle the printer and everything is "fixed". I tried printing this file twice the first time it failed at 50% the last time around 25%.

      I have printed this file successfully with PLA settings and a higher infill 30%, hotend 210, bed 60 and 2 fan speeds of 60% layer 2 and 100% past that. That file is here good gcode file

      I have the bad file sliced at 10% infill and will see if it makes a difference...this seems like a bug?

      Thanks,
      Jim

      1 Reply Last reply Reply Quote 0
      • Phaedruxundefined
        Phaedrux Moderator
        last edited by

        Please post your config.g and the results of M122 after it has stopped. Do you see any errors in the gcode console?

        Z-Bot CoreXY Build | Thingiverse Profile

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA