Bond tech extruder ratio
-
Hello
Bondtech site says : "The Bondtech BMG utilizes an internal gearing ratio of 3:1 "
and in the RRF configurator I see 1:3.
May I have to invert the values in the RFF configurator ?
Thanks -
Hmm, it's a bit confusing. It says 1:3 but the effect is what you would expect for 3:1.
ie, using 1:3 in the configurator gives a steps per mm around 400 something which is correct.
-
The magic number is 415 ....
-
Thanks for the info
