Odd prints with super jagged edges
-
Hey all,
These are my first prints and they are coming out super jagged. I've tried messing with different extruder speeds but it doesn't change much. My Delta moves super quick when printing. Not sure if that is the cause… anyways. The prints are below. What does it look like to you?
Here is my config file if that helps.
Configuration file for T3P3 Kossel XL with Duet WiFi: https://postimg.org/gallery/2gl47q47k/
And the pictures of my prints. https://postimg.org/gallery/3c054p24m/
-
Have you calibrated the extruder steps per mm?
-
I have not, i must have missed that step during the initial setup. I'll calibrate it and report back the results.
-
Calibrating the extruder was the missing step, thanks for save dc42!
