Constant errors

A Former User

@dc42
Does not work

dc42

Are you using VIN power to the Duet, USB power, or powering it some other way?

A Former User

BOSSA just wont write.

And USB power

dc42

USB power alone may be insufficient. Please read the notes on avoiding USB ground loop problems at https://duet3d.dozuki.com/Wiki/USB_ground_loops and try again with VIN power. I assume that you have the 5V regulator on the Duet enabled.

A Former User

Running on VIN and a laptop results in the same problem.

dc42

Make sure that the PC and the Duet PSU are plugged into the same power distribution block then. Usually it's not a problem if they are not, but occasionally a home has faulty mains wiring.

A Former User

Not gonna risk it, unless duet waranty cowers a 5000€ pc.

A Former User

What i have tried so far.
USB power only: Does not work
USB power only nothing connected exept the USB: Does not work
VIN and USB via a laptop: Does not work

Used the jumppers and reset multiple times.

Nothing works just like i expected.

A Former User

Found the real problem, its a bad solder joint in the sd card slot, multimeter temp probe reads 67C.

A Former User

@Torppa said in Constant errors:

Found the real problem, its a bad soder joint in the sd card slot, multimeter temp probe reads 67C.

What does "soder" mean ?

A Former User

@CaLviNx

https://dictionary.cambridge.org/dictionary/english/nitpicker

Thanks now the world is saved.

English is not my first nor my second language.