Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    WiFi reported error: Failed while trying to connect

    Scheduled Pinned Locked Moved
    Firmware installation
    5
    26
    1.7k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • thrawn86undefined
      thrawn86 @dc42
      last edited by thrawn86

      @dc42
      Positive. Any reason I shouldn't be using 2.05.1 and 1.23?

      I have repeated the process a few times and occasionally have seen other errors including Code 4, Code 7, status error: Bad Reply format and status error: SPI timeout

      M122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.05.1 running on Duet WiFi 1.02 or later
Board ID: 08DLM-996RU-N8PS4-7JKDG-3S86P-TBA7N
Used output buffers: 1 of 24 (10 max)
=== RTOS ===
Static ram: 25712
Dynamic ram: 94000 of which 64 recycled
Exception stack ram used: 320
Never used ram: 10976
Tasks: NETWORK(ready,1268) DHTSENSOR(blocked,228) HEAT(blocked,912) MAIN(running,3692) IDLE(ready,160)
Owned mutexes:
=== Platform ===
Last reset 00:10:07 ago, cause: software
Last software reset time unknown, reason: User, spinning module GCodes, available RAM 11032 bytes (slot 0)
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x04433000 BFAR 0xe000ed38 SP 0xffffffff Task 0x4e49414d
Error status: 0
Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 0.0ms, max retries 0
MCU temperature: min 33.4, current 33.5, max 33.8
Supply voltage: min 11.8, current 11.9, max 11.9, under voltage events: 0, over voltage events: 0, power good: yes
Driver 0: standstill, SG min/max not available
Driver 1: standstill, SG min/max not available
Driver 2: standstill, SG min/max not available
Driver 3: standstill, SG min/max not available
Driver 4: standstill, SG min/max not available
Date/time: 1970-01-01 00:00:00
Cache data hit count 971815164
Slowest loop: 99.82ms; fastest: 0.07ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Move ===
Hiccups: 0, FreeDm: 160, MinFreeDm: 160, MaxWait: 0ms
Bed compensation in use: none, comp offset 0.000
=== DDARing ===
Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0
=== Heat ===
Bed heaters = 0 -1 -1 -1, chamberHeaters = 2 -1
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Segments left: 0
Stack records: 2 allocated, 0 in use
Movement lock held by null
http is idle in state(s) 0
telnet is idle in state(s) 0
file is idle in state(s) 0
serial is ready with "M122" in state(s) 0
aux is idle in state(s) 0
daemon is idle in state(s) 0
queue is idle in state(s) 0
autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 1.28ms; fastest: 0.00ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
HTTP sessions: 0 of 8
- WiFi -
Network state is changing mode
WiFi module is trying to connect
Failed messages: pending 0, notready 0, noresp 0
WiFi firmware version 1.23
WiFi MAC address bc:dd:c2:2d:64:f6
WiFi Vcc 3.47, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 26584
Socket states: 0 0 0 0 0 0 0 0
ok
WiFi reported error: Failed while trying to connect to ***
WiFi module is idle
      A Former User? 1 Reply Last reply Reply Quote 0
      • A Former User?
        A Former User @thrawn86
        last edited by

        @thrawn86 said in WiFi reported error: Failed while trying to connect:

        Any reason I shouldn't be using 2.05.1 and 1.23?

        There is no wifi firmware 2.05.1; that is reprap firmware. Reprap firmware 2.05.1 which is released together with DuetWiFiServer-1.23.bin; and it needs to be renamed to just DuetWifiServer.bin if you're doing things manually. In any case you'll have to have a valid DuetWiFiServer.bin file on the SD card as the latest M122 does show WiFi firmware version 1.23

        thrawn86undefined 1 Reply Last reply Reply Quote 0
        • thrawn86undefined
          thrawn86 @A Former User
          last edited by

          @bearer
          2.05.1 being the firmware reported by the board. I assume its relevant, but I'm sorry if my nomenclature isn't correct here.

          The title of the github page I downloaded this firmware from is literally "Release 2.05.1" so I assume that both the combined firmware and wifi firmware linked therein are the correct ones to use. M122 reports that both are those versions are installed on their respective parts. If this isn't correct, please let me know.

          RepRapFirmware for Duet 2 WiFi/Ethernet version 2.05.1 running on Duet WiFi 1.02 or later

          WiFi firmware version 1.23
          A Former User? 1 Reply Last reply Reply Quote 0
          • A Former User?
            A Former User @thrawn86
            last edited by

            @thrawn86 said in WiFi reported error: Failed while trying to connect:

            so I assume that both the combined firmware and wifi firmware linked therein are the correct ones to use

            but on the SD card the wifi firmware needs to be called just DuetWifiServer.bin not DuetWiFiServer-1.23.bin which is normally handled by the web interface automagically.

            still, odds are DuetWifiServer.bin on the SD card is version 1.23 as that is what the running wifi modue is reporting.

            thrawn86undefined 1 Reply Last reply Reply Quote 0
            • thrawn86undefined
              thrawn86 @A Former User
              last edited by

              @bearer

              YAT is the only way I have to talk to the board right now since I can't connect to DWC, so firmware is done and renamed manually.

              Ultimately I just want to figure out if I need to send this board back or not, updating to the correct firmware has never been this difficult.

              1 Reply Last reply Reply Quote 0
              • dc42undefined
                dc42 administrators
                last edited by

                If M122 reports that the WiFi firmware version is 1.23 then it has evidently been installed correctly. I think the WiFi module may be faulty and should be replaced.

                Duet WiFi hardware designer and firmware engineer
                Please do not ask me for Duet support via PM or email, use the forum
                http://www.escher3d.com, https://miscsolutions.wordpress.com

                thrawn86undefined 1 Reply Last reply Reply Quote 0
                • thrawn86undefined
                  thrawn86 @dc42
                  last edited by

                  @dc42

                  unfortunately the replacement from filastruder has an identical issue

                  M552 S0
ok
WiFi module started
M587 S"***" P"***"
ok
M552 S1
ok

...

WiFi reported error: Failed while trying to connect to ***
WiFi module is idle
M552
WiFi module is changing mode
ok
WiFi reported error: Failed while trying to connect to ***
WiFi module is idle
M552
WiFi module is changing mode
ok
M115
FIRMWARE_NAME: RepRapFirmware for Duet 2 WiFi/Ethernet FIRMWARE_VERSION: 2.03 ELECTRONICS: Duet WiFi 1.02 or later FIRMWARE_DATE: 2019-06-13b2
ok
M122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.03 running on Duet WiFi 1.02 or later
Board ID: 08DLM-996RU-N85T0-6JTD2-3S46Q-1UTZP
Used output buffers: 1 of 24 (9 max)
=== RTOS ===
Static ram: 25680
Dynamic ram: 93340 of which 164 recycled
Exception stack ram used: 256
Never used ram: 11632
Tasks: NETWORK(ready,1268) HEAT(blocked,916) MAIN(running,3808) IDLE(ready,160)
Owned mutexes:
=== Platform ===
Last reset 00:08:27 ago, cause: power up
Last software reset details not available
Error status: 0
Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 0.0ms, max retries 0
MCU temperature: min 28.0, current 32.6, max 32.7
Supply voltage: min 1.7, current 1.7, max 1.8, under voltage events: 0, over voltage events: 0, power good: no
Driver 0: ok, SG min/max not available
Driver 1: ok, SG min/max not available
Driver 2: ok, SG min/max not available
Driver 3: ok, SG min/max not available
Driver 4: ok, SG min/max not available
Date/time: 1970-01-01 00:00:00
Cache data hit count 1006782636
Slowest loop: 100.14ms; fastest: 0.06ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Move ===
Hiccups: 0, FreeDm: 169, MinFreeDm: 169, MaxWait: 0ms
Bed compensation in use: none, comp offset 0.000
=== DDARing ===
Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0
=== Heat ===
Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Segments left: 0
Stack records: 1 allocated, 0 in use
Movement lock held by null
http is idle in state(s) 0
telnet is idle in state(s) 0
file is idle in state(s) 0
serial is ready with "M122" in state(s) 0
aux is idle in state(s) 0
daemon is idle in state(s) 0
queue is idle in state(s) 0
autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 1.26ms; fastest: 0.00ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
HTTP sessions: 0 of 8
- WiFi -
Network state is changing mode
WiFi module is trying to connect
Failed messages: pending 0, notready 0, noresp 0
WiFi firmware version 1.23
WiFi MAC address bc:dd:c2:2d:5e:3e
WiFi Vcc 3.36, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 27224
Socket states: 0 0 0 0 0 0 0 0
ok
WiFi reported error: Failed while trying to connect to ***
WiFi module is idle

                  at this point I have done literally nothing but open the box, connect the antenna and perform the steps described in : https://duet3d.dozuki.com/Guide/1.)+Getting+Connected+to+your+Duet/7 , sans firmware update. 2.03 was what I was running on my first board connected to the same network, before the sd card slot died.

                  1 Reply Last reply Reply Quote 0
                  • thrawn86undefined
                    thrawn86
                    last edited by

                    in addition, subsequent attempts (restarting, forgetting and re-adding network, creating a new SSID and connecting to that instead) have all yielded the same variety of wifi error messages including:

                    -Error retrieving WiFi status message: bad reply format version

                    Error retrieving WiFi status message: SPI timeout

                    Failed to change WiFi mode (code -7)
                    A Former User? 1 Reply Last reply Reply Quote 0
                    • A Former User?
                      A Former User @thrawn86
                      last edited by A Former User

                      @thrawn86 said in WiFi reported error: Failed while trying to connect:

                      -Error retrieving WiFi status message: bad reply format version

                      normally fixed by (from YAT etc)

                      M552 S-1 ;to disable the wifi module
M552 S0 ;to disable networking/idle wifi
G4 S1 ;wait a second
M587 S"" P"" ; insert ssid and passphrase to add wifi
M552 S1 ;to enable networking

                      but to try and get some more info on the other issues i'd run

                      M588 S"*"; forget all previous access point info

                      then power down, remove the SD card and power it back up without the SD card. connect to usb/YAT and run

                      M111 P14 S1 ;to enable wifi debug
M552 S-1 ;to disable the wifi module
M552 S0 ;to disable networking/idle wifi
G4 S1 ;wait a second
M587 S"" P"" ; insert ssid and passphrase to add wifi
M552 S1 ;to enable networking

                      (don't need to type ; and what comes after, but its safe to copy/paste as is)

                      edit: unclear - you installed RRF 2.03 but wifi 1.23 was on there already?

                      thrawn86undefined 1 Reply Last reply Reply Quote 0
                      • thrawn86undefined
                        thrawn86 @A Former User
                        last edited by thrawn86

                        @bearer
                        That was exactly what was on the board out of the box.

                        e:

                        M552 S0
ok
WiFi module started
M588 S"*"
ok
M552
WiFi module is disabled
ok
M111 P14 S1
Debugging enabled for modules: WiFi(14)
Debugging disabled for modules: Platform(0) Network(1) Webserver(2) GCodes(3) Move(4) Heat(5) DDA(6) Roland(7) Scanner(8) PrintMonitor(9) Storage(10) PortControl(11) DuetExpansion(12) FilamentSensors(13) Display(15)
ok
M552 S-1
ok
M552 S0
WiFi: 
WiFi:  ets Jan  8 2013,rst cause:2, boot mode:(3,6)
WiFi: 
ok
WiFi: load 0x4010f000, len 1384, room 16 
WiFi: tail 8
WiFi: chksum 0x2d
WiFi: csum 0x2d
WiFi: v3fff168c
WiFi: ~ld
WiFi module started
G4 S1
ok
M587 S"Battlestar Pegasus Mainframe" P"***"
ok
M552 S1
ok
WiFi: 
WiFi: add if0
WiFi: wifi evt: 8
WiFi: scandone
WiFi: ../src/SocketServer.cpp(353): found network dobry22
WiFi: ../src/SocketServer.cpp(353): found network Alex WiFi
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network Brother Eye
WiFi: ../src/SocketServer.cpp(353): found network luk-ela
WiFi: ../src/SocketServer.cpp(353): found network PS4-A490FF8D684C
WiFi: ../src/SocketServer.cpp(353): found network PS4-3B1F4A9CD2C0
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network Wifi is Jericho!!
WiFi: ../src/SocketServer.cpp(353): found network Toilet Cam #12
WiFi: ../src/SocketServer.cpp(353): found network Loki1
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network ATT528s735
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network The Room Of Requirement
WiFi reported error: no known networks found
WiFi module is idle
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: scandone
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network Brother Eye
WiFi: ../src/SocketServer.cpp(353): found network ATT528s735
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network luk-ela
WiFi: ../src/SocketServer.cpp(353): found network PS4-3B1F4A9CD2C0
WiFi: ../src/SocketServer.cpp(353): found network PS4-A490FF8D684C
WiFi: ../src/SocketServer.cpp(353): found network Toilet Cam #12
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network Wifi is Jericho!!
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network Petersen
WiFi: ../src/SocketServer.cpp(353): found network SEC_LinkShare_836496
WiFi: ../src/SocketServer.cpp(353): found network Loki1
WiFi: ../src/SocketServer.cpp(353): found network TK2.4
WiFi: ../src/SocketServer.cpp(353): found network dobry22
WiFi: ../src/SocketServer.cpp(353): found network The Room Of Requirement
WiFi: ../src/SocketServer.cpp(353): found network degapudi
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network CRAZYVirus
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network MAXIMUS
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network NETGEAR56
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi reported error: no known networks found
WiFi module is idle
WiFi: ../src/SocketServer.cpp(353): found network TP-LINK_D28A
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: scandone
WiFi: ../src/SocketServer.cpp(353): found network dobry22
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network Alex WiFi
WiFi: ../src/SocketServer.cpp(353): found network luk-ela
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network PS4-A490FF8D684C
WiFi: ../src/SocketServer.cpp(353): found network PS4-3B1F4A9CD2C0
WiFi: ../src/SocketServer.cpp(353): found network Toilet Cam #12
WiFi: ../src/SocketServer.cpp(353): found network NETGEAR20
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network Wifi is Jericho!!
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network Srbija 2G
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network Loki1
WiFi: ../src/SocketServer.cpp(353): found network ATT528s735
WiFi: ../src/SocketServer.cpp(353): found network degapudi
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network MAXIMUS
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi reported error: no known networks found
WiFi module is idle
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network CRAZYVirus
WiFi: scandone
WiFi: ../src/SocketServer.cpp(353): found network ATT528s735
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network Brother Eye
WiFi: ../src/SocketServer.cpp(353): found network dobry22
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network luk-ela
WiFi: ../src/SocketServer.cpp(353): found network Battlestar Pegasus Mainframe
WiFi: ../src/SocketServer.cpp(353): found network BattlePi24
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network PS4-A490FF8D684C
WiFi: ../src/SocketServer.cpp(353): found network NETGEAR20
WiFi: ../src/SocketServer.cpp(353): found network Wifi is Jericho!!
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network Toilet Cam #12
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network Srbija 2G
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network PS4-3B1F4A9CD2C0
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network Loki1
WiFi: ../src/SocketServer.cpp(353): found network ATT3Hkz4Mq2.4
WiFi: ../src/SocketServer.cpp(353): found network The Room Of Requirement
WiFi: ../src/SocketServer.cpp(353): found network MAXIMUS
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network CRAZYVirus
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network degapudi
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: ../src/SocketServer.cpp(353): found network 
WiFi: sleep enable,type: 2
WiFi: wifi evt: 2
WiFi: scandone
WiFi: state: 0 -> 2 (b0)
WiFi: state: 2 -> 0 (2)
WiFi: reconnect
WiFi: wifi evt: 1
WiFi: STA disconnect: 2
WiFi: scandone
WiFi: state: 0 -> 2 (b0)
WiFi: state: 2 -> 0 (2)
WiFi: reconnect
WiFi: wifi evt: 1
WiFi: STA disconnect: 2
WiFi: scandone
WiFi: state: 0 -> 2 (b0)
WiFi: state: 2 -> 0 (2)
WiFi: reconnect
WiFi reported error: Failed while trying to connect to Battlestar Pegasus Mainframe
WiFi module is idle
WiFi: wifi evt: 1
WiFi: STA disconnect: 2
WiFi: scandone
WiFi: del if0
WiFi: usl
WiFi: mode : null
WiFi: wifi evt: 8
WiFi: mode : sta(bc:dd:c2:2d:5e:3e)
WiFi: add if0
WiFi: wifi evt: 8
WiFi: scandone

                        after that it just starts looping. Also, I was able to start it up in AP mode and I can get into DWC that way if needed.

                        A Former User? 1 Reply Last reply Reply Quote 0
                        • A Former User?
                          A Former User @thrawn86
                          last edited by A Former User

                          @thrawn86 is the network 2.4ghz?

                          or maybe the SSID is too long for the firmware to handle, dc42?

                          edit nvm, it finds the network but not on every scan, probaly poor signal quality.

                          thrawn86undefined 1 Reply Last reply Reply Quote 0
                          • thrawn86undefined
                            thrawn86 @A Former User
                            last edited by

                            @bearer

                            to eliminate that possibility as well as the 2.4ghz issue (our network is simulcast 2.4/5.0) I created an entirely new 2.4ghz-only SSID with the same results.

                            1 Reply Last reply Reply Quote 0
                            • A Former User?
                              A Former User
                              last edited by

                              try running a wifi scanning app to see which channel is least congested and switch to that?

                              thrawn86undefined 1 Reply Last reply Reply Quote 0
                              • thrawn86undefined
                                thrawn86 @A Former User
                                last edited by

                                @bearer

                                I moved the antenna as close as I could, it looks like it is pulling in Battlestar Pegasus Mainframe and BattlePi24 on every scan, both of which are broadcasting 2.4, and the latter is 2.4 only.

                                Screenshot_20200518-203650_Wifi Analyzer.jpg

                                2.4 is pretty crowded here but thats about the best I can do. It didn't seem to be a problem on my older duet with internal antenna.

                                A Former User? 1 Reply Last reply Reply Quote 0
                                • A Former User?
                                  A Former User @thrawn86
                                  last edited by A Former User

                                  @thrawn86 said in WiFi reported error: Failed while trying to connect:

                                  It didn't seem to be a problem on my older duet with internal antenna.

                                  all it takes is a new neighbor, its very unlikely both boards had a fault. maybe wifi and/or internal antenna isn't the best option for your location. (ed: or your router may be among a few that have shown to be incompatible with the ESP8266 chip, but if you haven't changed the router then odds are your environment changed. i.e. (new) neighbor with new wifi router causing poor signal)

                                  1 Reply Last reply Reply Quote 0
                                  • First post
                                    Last post
                                  Unless otherwise noted, all forum content is licensed under CC-BY-SA