RepRapFirmware 3.01-RC6 released

dc42

@Dougal1957 said in RepRapFirmware 3.01-RC6 released:

I have upgraded mine to 1.3 of DSF but when attempting to upgrade to RC6 I get a failure due to no IAP file

That file should be included in the DSF release. I can provide it if necessary.

Dougal1957

@dc42 please but it definitly fails and I have tried to do the Sudo Apt-get Update sequence twice as well I have appended the M122 log to my post above.

I will probably need simple instruction on what to do with the file mind.

Doug

chrishamm

@Dougal1957 Sorry, looks like like this file was missing in the RRF package, I've just added it back and uploaded it to another location: http://pkg.duet3d.com/Duet3iap_spi_MB6HC.bin You may need to rename it to Duet3iap_spi.bin.

if the issue is stable/unstable package feed run grep duet3d -r /etc/aptto check and echo "deb https://pkg.duet3d.com/ unstable armv7" | sudo tee /etc/apt/sources.list.d/duet3d-unstable.listto fix if needed.

or what that guy said

chas2706

@Dougal1957 said in RepRapFirmware 3.01-RC6 released:

RepRapFirmware for Duet 3 MB6HC version 3.01-RC5 running on Duet 3 MB6HC v0.6 or 1.0

You M112 suggests you are running 3.01-RC5.

@chrishamm said in RepRapFirmware 3.01-RC6 released:

To check, have a look at /etc/apt/sources.list.d/duet3d.list and make sure you have unstable instead of stable in there.

btw that conflicts with the wiki that says to create another file duet3d-unstable.list

Dougal1957

@chas2706 exactly the point the upgrade to rc6 is failing

Dougal1957

@bearer Defo on the Unstable branch

pi@duet3:~ $ grep duet3d -r /etc/apt
/etc/apt/sources.list.d/duet3d.list:deb https://pkg.duet3d.com/ stable armv7
/etc/apt/sources.list.d/duet3d-unstable.list:deb https://pkg.duet3d.com/ unstable armv7
Binary file /etc/apt/trusted.gpg.d/duet3d.gpg matches
pi@duet3:~ $ echo "deb https://pkg.duet3d.com/ unstable armv7" | sudo tee /etc/apt/sources.list.d/duet3d-unstable.list
deb https://pkg.duet3d.com/ unstable armv7
pi@duet3:~ $ sudo apt-get update
Hit:1 http://archive.raspberrypi.org/debian buster InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease        
Hit:3 https://pkg.duet3d.com unstable InRelease                        
Hit:4 https://pkg.duet3d.com stable InRelease    
Reading package lists... Done
pi@duet3:~ $

Doug

@Dougal1957 said in RepRapFirmware 3.01-RC6 released:

Defo on the Unstable branch

yeah

do wget http://pkg.duet3d.com/Duet3iap_spi_MB6HC.bin -O /opt/dsf/sd/sys/Duet3iap_spi.bin

chrishamm

@Dougal1957 The stable list is still in there: sudo rm /etc/apt/sources.list.d/duet3d.list followed by sudo apt-get update should work for you

@chrishamm said in RepRapFirmware 3.01-RC6 released:

The stable list is still in there

is that a problem, more importantly, should it be a problem?

Dougal1957

@bearer that sorted it Thanks very much as you probably imagine I am not good with LINUX at all although I am learning some of it

@Dougal1957 i only translated

chrishamm said in RepRapFirmware 3.01-RC6 released:

@Dougal1957 Sorry, looks like like this file was missing in the RRF package, I've just added it back and uploaded it to another location: http://pkg.duet3d.com/Duet3iap_spi_MB6HC.bin You may need to rename it to Duet3iap_spi.bin.

into copy/paste; and we all had to learn at some point

Dougal1957

@bearer Prob is that I am getting a bit old you know the saying about teaching old Dogs new tricks lol

@Dougal1957 you're trying, and succeeding; no-one gonna fault you for that.

chas2706

Just upgraded and having issues.
On the SBC display DWC reports that the sys drive is unmounted:

But in web browser DWC looks ok but nothing works when clicked:

Any ideas?

@chas2706 said in RepRapFirmware 3.01-RC6 released:

On the SBC display DWC reports that the sys drive is unmounted:

see what ls -l /opt/dsf/sd says in a ssh shell?

chas2706

@bearer said in RepRapFirmware 3.01-RC6 released:

ls -l /opt/dsf/sd

I get this:

pi@Duet3:~ $ ls -l /opt/dsf/sd
total 20
drwxr-xr-x 4 pi pi 4096 Mar 6 17:13 filaments
drwxr-xr-x 2 pi pi 4096 Apr 3 11:45 firmware
drwxr-xr-x 3 pi pi 4096 Apr 3 13:56 gcodes
drwxr-xr-x 9 pi pi 4096 Mar 17 09:08 macros
drwxr-xr-x 5 pi pi 4096 Apr 3 13:48 sys
lrwxrwxrwx 1 pi pi 7 Oct 22 12:00 www -> ../dwc2
pi@Duet3:~ $

@chas2706 said in RepRapFirmware 3.01-RC6 released:

drwxr-xr-x 5 pi pi 4096 Apr 3 13:48 sys

not sure if dcs is run as pi instead of root now, i'll leave that to someone else to confirm or correct.

Danal

Two errors, on a machine that started on RC4. It may be worth noting the machine was built from the Duet (full) image, and the instructions for moving to the unstable feed were followed via copy/paste. I'd be happy to report anything you guys need to see; the point of the above being it should be set up correctly.

Anyway, first error:

4/3/2020, 8:41:16 AM	M997
Error: M997: Failed to find IAP file /opt/dsf/sd/sys/Duet3iap_spi.bin

As suggested above, wget http://pkg.duet3d.com/Duet3iap_spi_MB6HC.bin -O opt/dsf/sd/sys/Duet3iap_spi.bin fixed this.

However, I then received:

4/3/2020, 8:42:46 AM	M997
Error: M997: Failed to find firmware file /opt/dsf/sd/sys/Duet3Firmware.bin

I tried to fix this with a symlink, this did not work. ln -s Duet3Firmware_MB6HC.bin Duet3Firmware.bin

lrwxrwxrwx 1 pi   pi       23 Apr  3 08:58 Duet3Firmware.bin -> Duet3Firmware_MB6HC.bin

I then ran sudo apt install reprapfirmware --reinstall and this did work. Including updating the main board to RC6. The symlink was still in place; this may or may not have made a difference.

Expansion board updates worked, and report RC5.

4/3/2020, 9:12:59 AM	M115 B0
FIRMWARE_NAME: RepRapFirmware for Duet 3 MB6HC FIRMWARE_VERSION: 3.01-RC6 ELECTRONICS: Duet 3 MB6HC v0.6 or 1.0 FIRMWARE_DATE: 2020-04-03b3
4/3/2020, 9:12:55 AM	M115 B2
Board EXP3HC firmware 3.01-RC5 (2020-03-29b1)
4/3/2020, 9:12:45 AM	M115 B1
Board EXP3HC firmware 3.01-RC5 (2020-03-29b1)

Board: Duet 3 MB6HC (MB6HC)
DSF Version: 1.3.0.0
Firmware: RepRapFirmware for Duet 3 MB6HC 3.01-RC6 (2020-04-03b3)
Duet Web Control 2.1.0