Port Forwarding not working on my Duet Wifi
-
I have a similar issues, I can't access the Duet Wifi when I am logged in my VPN.
VPN devices use a different subnet and are routed via the gateway.
For me it seems the Duet does not use the gateway to send the data.
One solution might be to use a reverse proxy but I didn't try yet… -
Currently, the Duet WiFi will always use the gateway address assigned to it by the router using DHCP. Do you need to set a different gateway address to get access via your VPN?
-
Nope I don't need a different gateway, it is just that gateway, it does DHCP and the VPN (and a lot of other stuff).
But from VPN I don't get a connection… -
Possibly not relevant, but my router won't show the DuetWifi in the list of attached devices even when it is connected and functioning normally. But knowing its MAC address I can assign it to be allocated the same IP each time reliably.
-
Possibly not relevant, but my router won't show the DuetWifi in the list of attached devices even when it is connected and functioning normally. But knowing its MAC address I can assign it to be allocated the same IP each time reliably.
I can do the same, though the MAC address my router shows has nothing in common with the one I set in the config…
-
The Duet WiFi ignores the G-code network configuration; its network settings live aboard the ESP8266 board.
-
The Duet WiFi ignores the G-code network configuration; its network settings live aboard the ESP8266 board.
Nice to know… I just changed the files which were on the SD whne it arrived, so I thought what was already in there would work...
-
The Duet WiFi ignores the G-code network configuration; its network settings live aboard the ESP8266 board.
Nice to know… I just changed the files which were on the SD whne it arrived, so I thought what was already in there would work...
This and other known firmware issues are listed at https://duet3d.com/wiki/Pre-production_hardware_limitations_and_known_firmware_issues.
-
This and other known firmware issues are listed at https://duet3d.com/wiki/Pre-production_ … are_issues.
Oh well, I read that page, I can't remember everything
I am thinking how I can possibly analyse whats going on, but I have only "cheap and unmanaged" network switches so packet analyzing between "other" devices than my computer and the device is not possible…
-
Guys, tell me please. I have a similar problem, but it appeared just after I tried to change my ip to another. The question is whether the fault be a proxy server?
