RepRapFirmware 3.0RC2 now available

blt3dp

Is it up on the unstable package server?

chrishamm

The latest version on the unstable package feed is now RC2+1 because I found another DSF-related issue involving macro files. If anyone wants to compile it, those changes are on my v3-chrishamm branch of RRF.

chas2706

@chrishamm
Hi are you aware of M291 error "command not known" in DSF

chrishamm

Yes, see https://github.com/chrishamm/DuetSoftwareFramework/tree/dev#known-issues

chas2706

Ok cheers!

blt3dp

@chrishamm

Doing sudo apt-get update and then apt-get upgrade gives this error on reprap firmware package.

Setting up reprapfirmware (1.2.2.0-1) ...
[error] Failed to connect to Duet
   System.IO.IOException: Error 16. Cannot put line into event mode.
   at LinuxDevices.InputGpioPin..ctor(String devNode, Int32 pin, String consumerLabel) in /home/christian/duet/DuetSoftwareFramework/src/LinuxDevices/InputGpioPin.cs:line 60
   at DuetControlServer.SPI.DataTransfer.Init() in /home/christian/duet/DuetSoftwareFramework/src/DuetControlServer/SPI/DataTransfer.cs:line 65
   at DuetControlServer.SPI.Interface.Init() in /home/christian/duet/DuetSoftwareFramework/src/DuetControlServer/SPI/Interface.cs:line 65
   at DuetControlServer.Program.Main(String[] args) in /home/christian/duet/DuetSoftwareFramework/src/DuetControlServer/Program.cs:line 92

Everything else updated except for the firmware, still on 3.0RC1

I noticed the Duet3Firmware_MB6HC.bin on the virtual SD card had today's timestamp so I ran M997 and it updated, now it shows 3.0RC2+1

jay_s_uk

@blt3dp

I had that happened as well.
If you run M997 S0, the firmware is still updated

blt3dp

@jay_s_uk said in RepRapFirmware 3.0RC2 now available:

@blt3dp

I had that happened as well.
If you run M997 S0, the firmware is still updated

Yep, I was just doing an edit. That's exactly what I did.

chrishamm

Error code 16 means Device or resource busy. From what version did you upgrade?

jay_s_uk

@chrishamm RC2

chrishamm

I mean from what DSF version

blt3dp

@chrishamm said in RepRapFirmware 3.0RC2 now available:

I mean from what DSF version

I was coming from DSF version 1.2.1.0 with with 3.0RC1

Unpacking duetsoftwareframework (1.2.2.0) over (1.2.1.0)
Unpacking reprapfirmware (1.2.2.0-1) over (1.2.1.0-1)
Unpacking duettools (1.2.2.0) over (1.2.1.0)
Unpacking duetcontrolserver (1.2.2.0) over (1.2.1.0)
Unpacking duetruntime (1.2.2.0) over (1.2.1.0)

jay_s_uk

@chrishamm 1.2.1.0 for me too

chrishamm

I see, thanks. I'll try to reproduce that.

Danal

I had the same behavior (although I did not capture the error) when moving from Beta 12 to RC1.

Same fix, M997 S0

daavery

@chrishamm same here too from rc1 to rc2

chrishamm

I believe I know why it's happening. I've added a delay to the RRF package script to work-around this problem. Please let me know if that fixes it.