New DuetWifi no page on 192.168.1.1

[gschora]

Hi!

I've got my new duet wifi, and I'm getting really frustrated.
I tried to configure the wifi before putting it into my printer, so nothing is connected yet.

I connected the board via usb and using a serial console.
Starting wifi via M552 S1 is working, AP is visible and I can connect to the AP.

When I try to open the webpage on 192.168.1.1 for configuring wifi, chrome (or firefox or any browser) wont connect, so I don't see a page.
(again connection to ap is working, pinging 192.168.1.1 also working, just no page)

I updated the firmware to the latest stable (Main 1.17c, DWC 1.14a, DWS 1.03) via M997 S0:1:2 and update seemed to work fine, but still
no page on 192.168.1.1

Is there code to check the three firmware versions?

Has anyone any suggestions what's the problem?
Is there a way to configure wifi without this page?

[dc42]

Make sure you are typing http://192.168.1.1 into your browser, not just the IP address, otherwise your browser may be defaulting to https.

[gschora]

Yes I've tried that before, still no page.

But now it is fixed:
I connected my Iphone to the duetAP, because I wanted to scan the open ports on the duet.
It found the port 80 open and when I opened in safari, I got the wifi-setup-page.

Really odd behaviour, because I've tried everything (clear dns cache, setup VM with clean windows, reset my tablet, even used a console browser…) nothing worked
I never had any problems with other esp8266.

Thanks anyway!