PanelDuet chamber temperature?

tech

Hi,

Do you know when this will be added?

Thanks

Chris

dc42

I won't be working on PanelDue firmware until October at the earliest due to upcoming work on RepRapFirmware. It's quite a lot of work to display chamber temperature because PanelDue needs to fetch all the heater mappings just like DWC does, and work out how they are assigned to tools and bed and chamber heaters. I'll be changing the way heaters are displayed at the same time to allow for variable tool/heater mapping.

tech

Ok, thanks for the follow up!

Best Regards

Chris

tech

Hi,

I follow up on the discussion we had about the chamber temperature. I was wondering if you started the working and when do you expect to see the new version?

Thanks

Best

Chris

sonderzug

@dc42 I'd like to carefully resurrect this thread and inquire about the implementation of this feature. Not so much to nag but maybe to add to the list of people who requested it. Chamber temperature is an important metric with my high temperature printer (+150 °C chamber temperature), and using macros for this and running to the computer to check on the status of the heating process is quite a nuisance.

Best regards,
Niklas

Kashyap

@dc42 I have heated chamber as well, it would be great if you could implement in future build.
Thanks and Best,
Kash

dc42

It's on my list for the next major version of PanelDueFirmware.

stuartsm

Although I'm a bit late, I'm im the middle of implementing an enclosure and enclosure heater. I would love display and control of enclosure temperature from the front panel. Using the console to issue M141 commands works but is less than convenient.

tojosaja

I got my paneldue 7i a few days before and I had to notice that the chamber temperature still can't be seen or adjusted. I reviewed the code and the implementation seems to be possible with manageable effort.
Is anybody still working on the implementation?
dc42 stated he will do so with the next major release. But it would be good to know when it will be published to decide whether to wait or to program by myself...

taconite

+1

add me to the list of interested people