I have a Duet 2 Ethernet which was running 2.xx but I have now just upgraded to 3.0, on a custom delta with smart effector and a Mosaic Palette 2.
I want to be able to move the effector outside the limits of the print bed in order to set up an in-place side transition for the Palette 2 - effectively allowing me to purge the transition material generated by the Palette 2 off the side of the printer into a container, rather than needing to print a transition tower between the colour changes.
To do this I expect that I will need a before- and after- purge script configured in Canvas3D to permit the effector to be moved outside of the print bed dimensions, and that I should simply be able to use M564 S0 and M564 S1 in these scripts respectively.
However in testing I cannot jog the print head past the edge of the bed even after I have issued the M564 S0 command, even though according to the documentation I should be able to - I can get to the edge of the bed but further jogs are ignored (or just edge towards Xmin / Y0). This happened on both 2.xx and 3.0 firmwares.
Is there something I've missed to allow movement outside the delta print bed limits? I know that H0 is not permitted on my Delta but maybe S0 is also being blocked in error?