Thanks to all for your help.
The anycubic heatbed comes already with with wires attached.
But i'll keep that in mind and check the diameter.

I don't have the chiron. I only want to use the printbed of that printer together with the duet 2 wifi in the idex printer that i am going to build.

I already have a phoenix contact 24V 40A PSU that makes no noise.
And i dont want to use 230V AC.
If it's as simple as connecting a mosfet between the Duet Board and the heatbed, i'll go that route.

The problem mysteriously solved itself.
After countless attempts it worked now.

Hello,

i want to use the anycubic chiron heated bed with the duet 2 wifi.

The problem is, it has 500W and at 24V that is around 21A.
What happens when i connect it to the board?
Will the board limit the current at 18A or does the heated bed draw the 21A and overload the board and brake something?

What options do i have, to use this combo?
Or maybe somebody knows a 400x400 hetaed bed that does not exceed the 18A limit at 24V?

Thans in advance.

Regards

Hello, i cant create an new topic in general discussion oder hardware.
I always get a spam error.

It is only text, no links or anything.

What can i do?

Regards