Topics created by TQKez 0

@TQKez-0 If you are running in standalone mode (no connected Raspberry Pi), all releases are on Github: https://github.com/Duet3D/RepRapFirmware/releases
3.5.0-rc1 is the top one, currently. It is not a final release, and there are a couple of issues to be resolved, so use with caution. You can always revert to 3.4.6 if you want.

If you are using an SBC (eg Raspberry Pi), you will need to switch to the 'unstable' release, see https://docs.duet3d.com/User_manual/Machine_configuration/DSF_RPi#switch-to-unstable-packages

Ian

@jay_s_uk said in Correct way to setup dust extractor:

@TQKez-0 M7 isn't supported by RRF, but you can add support for it yourself.
just create a file called M7.g and put it in sys, with whatever you want to happen as its contents.
Then, when M7 is called, the contents of that file will be processed.

Oh thats great!

@TQKez-0 said in How to find which line throws an error?:

Is there any way to get the error to actually state which line is supposedly outside machine limits?

This has been fixed in 3.5.0-rc.2. See https://github.com/Duet3D/RepRapFirmware/issues/800

T3P3 created this issue in Duet3D/RepRapFirmware closed Report line number in error messages #800

@droftarts said in What is a 'tool' in CNC according to RepRap in CNC world?:

I’m not actually a CNC user, at least not yet!

Give it time! We'll bring you over to the dark side and you'll never look back - if you like lots of noise, woodchips and sawdust everywhere 👍

@tqkez-0

Check out the object model. https://duet3d.dozuki.com/Wiki/Object_Model_of_RepRapFirmware

DuetWebControl also includes an object model plugin (at least newer versions do). Run that and you should be able to access the position for each axis and reference it using variations of @TQKez-0's example.

@tqkez-0 said in Kill stepper power when switch triggered (extra end stop):

Just investigating M581 and it seems I would still have to assign it to one of the axis, which would mean I'm still limited to one end stop per axis.

I'm not sure what you mean by this. Where did you see this? I think you may be looking at old documentation.

https://docs.duet3d.com/User_manual/Reference/Gcodes#m581-configure-external-trigger

@tqkez-0 said in Kill stepper power when switch triggered (extra end stop):

I've already assigned a high end z endstop.
I'd like to use M581 to trigger emergency stop on a seperate z low end stop.
Is it possible?

Yes. You need to define which pin you want to use using M950 first.