Topics created by TPJensen

@deckingman

I did that and I can see that could have been a good thing to do if it went wrong

@droftarts

Yes okay I see your point.... It can be that the filament is not the best "NO NAME" I got it with the printer and only used it for test but I see it is maybe not the best idea to use it for...

UPDATE: used premium to calibrate. Filament and before it 100 mm = E388.21 and now with multi tests and did take the advange then 100mm = E367.18

I bought the gears and Printed my own,which I felt was more in the open source spirit. 🙂

@Veti

Okay thanks.... Now I just need to learn the RRF config tool 😁

Maybe I should also update my Ender 3 pro also🤔

Thank you for your input

@Phaedrux said in Duet 2 Wifi- wifi connect problems:

What browser are you using?

Do you have another browser installed you can try to see if it behaves the same?

As a shot in the dark can you try clearing your browser cache?

Can you try increasing the number of AJAZ retries? It's the setting in the middle of the screen in your last screenshot. It's 1 now, try 3 or 4.

I use Chome in windows pc. also I did try edge
Ipad safari
Phone Safari
Laptop firefox

All the same result.... I have tried clear browser cache with no luck on the duet.

I will try to increase AJAX to 3 and if that helps

@Phaedrux said in PanelDue cant update:

Nice Thanks again now preheat is setup

@veti

Okay that was easy then 😎

@phaedrux said in Fan1 dont show:

M563 P0 D0 H1 F0:2 ; Define tool 0

YES!!! it works now thank you so much