@markz many thanks for that suggestion/information. Will try that as well how to easy and fast after ending observation of the printer to ensure the port again.

Will let you inform how it works

Many thanks

Dan

Thanks a lot... Will fix this afternoon and have feedback

Best wishes

Danijel

@jay_s_uk said in Hotend FAN1 stops running when Print starts:

M563 P0 S"0.4er Nozzle" D0 H1 F0 ; define tool 0

Hello jay_s_uk said,

thanks a lot....it works....I wonder how long it will take until I'm relly fit due to configuration knowledge!

Great Forum dute to very kind and supportive member!

Danijel

Hi Gys,

may me help somehow how to thook up an PanelDue V3 7" to an BTT Octopus Pro F429 and how to configure it in System config?

I guess that i fired up the PanelDue Control Board....therefore i have to catch how it works or maybe i have to buy and complete new and other type of Touch Display that maybe fits better without any risk of firing it up

Many thnkas in advance

Where i may find all necessary information in one shot or rather follow up how to configure and what has to be respected to the WebCam addOn?

Many thx

Danijel

@markz many thanks for that suggestion/information. Will try that as well how to easy and fast after ending observation of the printer to ensure the port again.

Will let you inform how it works

Many thanks

Dan

@o_lampe,

Many thanks for your replay.
O.k. VPN does that mean that I have to buy software to be able "tunnel" my data through the www?
What about speed? Is there any significant performance lose?
To to your question:
Honestly it makes just sence to observe the print process trough the cam and maybe start a print and stop the process when problems occures.

I guess that just that will be necessary

Many thanks in advance

Hi guys,

May somebody tell me how to set the DWC or rather how to realise the DWC reachable secured from outside the own home network?

Many thanks

Dan

Hi guys,

Is there some good described manual how to configure the motion Webcam plugin?

Many thanks

Dan

@topenga SOLVED....found the zip.file and installed already

Thx

@chrishamm it seems that you are right...My DWC is Version 3.3.0. May someone me show the file i need to upload?!?! Cant find on GitHub the correct files...Thx

Hello all,

tried to install the plugins "Endstop Monitor" as well "MotionWebCam" after updating RFF 3.3 ==> 3.4.0rc2. This is the path to the PlugIns: https://github.com/Duet3D/DSF-Plugins/releases

When trieying to installing the MotionWebCam plugin this message was shown:
"invalid plugin manifest"

When trieying to install the Endstop Monitor plugin this message was shown:
"DuetWeb Control Version 3.3.0 is required" but i do have the V3.3.0 already installed.....

Now im confused......May anybody help me to chack this out?

Best regards

Danijel

Hi Deckingman,

Thx a lot for that detailed explanation. This will help me a lot.......

Best regards

Danijel