Best posts made by theBohnanza

Thanks, for the input! I will have a closer look tomorrow morning.

Cheers,
Alex

Dear @nhof, thanks for pointing me into the right direktion.

Indeed M569 did the trick.
These settings work fine for me:

M569 P10 S0 R1 T4:4:8:7
M569 P11 S1 R1 T4:4:8:7

The motors are absolutely wicked.
I run them on 24V and on the highest resolution settings- 40.000steps/rev. , which results in 474.8 steps/mm for X and Y. I use HTD3M Belts and 37Tooth Pulleys.

Cheers,
Alex