Topics created by Superbrain8

@Superbrain8 thanks, we created this issue:

https://github.com/Duet3D/RepRapFirmware/issues/1094

It's scheduled to be fixed between 3.6.0-rc.1 and 3.6.0 stable.

gloomyandy created this issue in Duet3D/RepRapFirmware open [Bug]: Long homing moves can cause HeatTaskStuck software reset #1094

@jay_s_uk didnt really showed up when searching for it, the pinned macros showed up but they are a bit bulky

@Superbrain8 i ran my V1 microprobe on a 1LC with no issues. I can't remember whether I joined grounds or ran them separately

Please send an email to warranty@duet3d.com and CC your reseller. Include a link to this forum thread and the details of your original purchase. You'll receive a reply with a form to fill out.

@dc42 will be a non issue for me in the future, im working on replacing the entire ribbon cable due to its limitations.
will run individual wires, just have to seperate them properly so they wont be close to stepper motor or other higher current wires.

Thanks a lot, this fixed it.

got the this solved, need to home x and y first, will add something to force it into my homez.g file