Topics created by SIam

@dc42 you're right in the latest beta of prusaslicer the menu appears in reprap flavor

it's ok with b7+7, thanks 👏 😊

@siam said in print timer restart after print ...:

@jay_s_uk said in print timer restart after print ...:

if you change the flavour, the settings tab for all the speeds etc comes back and you can fill them all in.

In my case this menu not appears, but I will look what is going wrong.

found it 😄 the Machine limits are only showed if Marlin is selected

@Skan can you start a new thread please and provide all the relevant information

@aitor said in How to get the result of a M command:

heat.heaters[0].avgPwm

Thank you that it was 😄

@hestiahuang said in [3.4.0 beta 3] Heater 0 fault:

@phaedrux
I guess so, but it must be not make sense that it doesn't work even in BANG-BANG mode.😢

Bang bang mode hasn't been very practical for quite a while. the firmware needs some idea of the heaters performance to allow the heater fault watch dogs to function. So PID tuning is highly recommended and basically required.

I assume that @dc42 will be able to tune the heater fault detection to be less sensitive to false positives.

This PR updates the list of input shaping algorithm.

https://github.com/Duet3D/DuetWebControl/pull/380

mfs12 opened this pull request in Duet3D/DuetWebControl closed modelEnums: updated input shaping algorithms #380

@siam thanks for your report. I've made a note to look into this.

@sebkritikel said in [3.4.0.b2] Issue with diagnostic (M122) information:

@siam Some other comments on this issue here: https://forum.duet3d.com/topic/24487/diagnostics-missing?_=1628456075700

No real solution yet , aside from having separate sessions, like you mentioned.

Thanks for pointing me to this thread ! I have overseen this 😱

@chrishamm said in [3.3.0] strange behavior after fresh start printer:

You seem to have two devices connected over HTTP to the Duet, is it possible that one client isn't DWC and doesn't query rr_reply frequently? That could lead to buffer starvation.

After this error messages in the console, i have started Firefox as second DCW client to watch if it is a browser Problem, the first instance was the Chrome Browser

@phaedrux The last week i had no issues with 3.2.2 so i will try today to go to the latest beta and try to get this problem

@nurooi use a 100mm cube, 1 bottom layer, 1 perimeters, and no infill. the Script will called on layer change in the slicer

@droftarts thats the next thing i will try! nasty problem 😊

This is now fixed (I hope) in the new 3.3RC1+1 firmware binary at https://www.dropbox.com/sh/dlb58vkmu1u4fkx/AAAelkXSfRKVwI6_yqRnhGHPa?dl=0.

@siam Thanks, I can confirm the highlighted item is off once the file list changes. I've got a fix ready for this.

@siam Thanks, I'll fix that. The correct range for the sampling rate should lie between 400-6000Hz.

@siam, I'm glad it's working now.

@jens55 it seems that i have found my work over the weekend .... in the hope of finding the fault

@SIam said in Pressure Advance ... tea time after each layer...:

one of it is prusaslicer they deliver only crap

How so? What is it doing?

ah ok thank you