Best posts made by sbNielsen

@droftarts
I just plugged the servo, and it works!

Thank you for the support!

@jay_s_uk
M115
FIRMWARE_NAME: RepRapFirmware for Duet 3 MB6HC FIRMWARE_VERSION: 3.5.0-rc.1++ ELECTRONICS: Duet 3 MB6HC v1.02 or later FIRMWARE_DATE: 2023-12-07 12:53:53

@droftarts said in Parsing error when loading height map:

@sbNielsen

axis0,axis1,min0,max0,min1,max1,radius,spacing0,spacing1,num0,num1
X,Y,0.00,17000.00,0.00,9000.00,-1.00,100.00,100.00,18,10

You have changed the axis length from 1700mm to 17000mm, and 900mm to 9000mm?! Also, you only have 17 points for each line of the probe data; you need 18 to go to from 0 (the first point) to 1700 (the 18th and last point) in 100mm steps.

Ian

Damn it, I change things to quick and then I fuck it up, sorry!

It works now! The main issues was the missing 18th column in the grid..

I feel stupid and happy haha, thank you for your help and patience!

To anybody reading this in the future, here is the .csv file that ended up working:

RepRapFirmware height map file v2 
axis0,axis1,min0,max0,min1,max1,radius,spacing0,spacing1,num0,num1
X,Y,0.00,1700.00,0.00,900.00,-1.00,100.00,100.00,18,10
  0.600,  0.500,  0.400,  0.400,  0.400,  0.400,  0.400,  0.300,  0.300,  0.400,  0.400,  0.500,  0.500,  0.600,  0.700,  0.900,  1.100,  1.100 
  0.400,  0.400,  0.300,  0.300,  0.200,  0.200,  0.200,  0.200,  0.200,  0.200,  0.300,  0.350,  0.450,  0.500,  0.700,  0.800,  1.050,  1.050 
  0.300,  0.200,  0.200,  0.100,  0.100,  0.100,  0.050,  0.000,  0.000,  0.000,  0.100,  0.200,  0.300,  0.450,  0.600,  0.800,  1.000,  1.000
  0.200,  0.100,  0.000, -0.100, -0.100, -0.100, -0.150, -0.200, -0.200, -0.200, -0.100, -0.100,  0.150,  0.280,  0.450,  0.680,  0.900,  0.900
  0.100,  0.000, -0.100, -0.200, -0.200, -0.300, -0.300, -0.300, -0.220, -0.220, -0.180, -0.050,  0.020,  0.180,  0.400,  0.600,  0.900,  0.900
  0.100,  0.000, -0.100, -0.200, -0.300, -0.400, -0.400, -0.400, -0.300, -0.300, -0.200, -0.150, -0.100,  0.000,  0.280,  0.500,  0.800,  0.800
  0.100,  0.000, -0.150, -0.280, -0.400, -0.450, -0.400, -0.400, -0.200, -0.250, -0.200, -0.200, -0.050,  0.160,  0.400,  0.700,  0.700,  0.700
  0.180, -0.050, -0.200, -0.300, -0.400, -0.400, -0.400, -0.400, -0.400, -0.350, -0.300, -0.250, -0.150,  0.050,  0.300,  0.600,  0.900,  0.900
  0.100, -0.100, -0.200, -0.300, -0.400, -0.400, -0.400, -0.400, -0.380, -0.350, -0.280, -0.200, -0.200,  0.080,  0.250,  0.600,  0.900,  0.900
  0.100, -0.100, -0.280, -0.380, -0.400, -0.440, -0.400, -0.400, -0.380, -0.350, -0.300, -0.280, -0.200,  0.000,  0.200,  0.550,  0.900,  0.900