Topics created by Saltlife716

Thank you very much!!
Cheers

Try using Mike's page to figure out what you are doing wrong.
But be careful the board he is using is not the latest and the Johnsl board is connected to different pins than required on the Duet Wifi.

http://www.sublimelayers.com/2016/01/fsr-auto-calibration-setup-for-duet.html

I don't know what I'm doing and I was able to figure it out using that.

I forgot to mention it is a delta style printer. I do no have a homeall.g, but i do have a homedelta.g

homedelta.g:

; homedelta.g
; called to home all towers on a delta printer
;
; generated by RepRapFirmware Configuration Tool on Fri Dec 29 2017 20:37:15 GMT-0500 (Eastern Standard Time)
G91 ; relative positioning
G1 S1 X405 Y405 Z405 F1800 ; move all towers to the high end stopping at the endstops (first pass)
G1 X-5 Y-5 Z-5 F1800 S2 ; go down a few mm
G1 S1 X10 Y10 Z10 F360 ; move all towers up once more (second pass)
G1 Z-5 F6000 ; move down a few mm so that the nozzle can be centred
G90 ; absolute positioning
G1 X0 Y0 F6000 ; move X+Y to the centre

My endstops don't trigger at all, I read your other post about moddin the optical endstop to get it to work. I will try that.

@saltlife716 do you have got a picture on how you solved this? I mean the fan’s because I have the same problem.