Topics created by pilot375

@dc42 The reset more than 17 hours prior was before starting the print. I generally always do a restart, then bed level etc before a large print.

@droftarts said in Looking for help Duet 6HC for a Core XY printer:

G1 H1 X-335 Y-335 F1800 ; move quickly to X or Y endstop and stop there (first pass)G1 H1 X-335 ; home X axisG1 H1 Y-335 ; home Y axisG1 X5 Y5 F6000 ; go back a few mmG1 H1 X-335 F360 ; move slowly to X axis endstop once more (second pass)G1 H1 Y-335 ; then move slowly to Y axis endstop

Thanks for that! When I do that, the carriage moves towards the "b" motor, not the "A" motor. I would gladly move the switches back to where I currently call 300,300 to match yours if it would be easier.

Thanks!

Thanks! Unfortunately, I had to leave for work and I should be able to try these finally next week!!