Best posts made by MrAwesome987

@jay_s_uk said in Duet 2 Wifi Random Resets:

@mrawesome987 those no name 128mb ones that probably came with a BTT are only good for one thing ... throwing in the bin.
They ALWAYS cause trouble on the LPC/STM port of RRF

Good news! The printer completed a print last night, it was about a 5-6 hour print. This is with the no name 128mb card, but I'll swap it out for the new one when it gets here.

On the card I had in the Duet prior, I tried the same exact print (same gcode) 3 or 4 times, and it failed within 2 hours every time.

I'll continue to test and update.

@fcwilt @fcwilt I was testing a ton of different stuff and I ended up commenting those out.

I just found the problem...

;Fan
M950 F0 C"fan0" ;Create Fan 0
M106 P0 S0
M950 F1 C"fan1" ;Create Fan 1
M106 P1 S1 

The "Create Fan 0" and the "Create Fan 1" was not commented. I have no idea how this happened, because I certainly didn't change it after doing the firmware update.

Well I feel like I wasted your time, but thanks for the help!

I got the new SD card yesterday and formatted it and copied my current file structure to it. Printed a bracket for my new printer build and it worked great. It was a fairly small print, only 3-4 hours, but it printed with no issues.

I guess this is resolved, unless it magically reappears later! Thanks for the help.

@jumpedwithbothfeet Just wanted to make sure both steppers are always synced. Is that a problem? It made sense when I designed it, is it overkill?