hello,
is anybody using camworks to generate gcode for duet?
Interested in the postprocessing plugin that should be used and or other tips,
thank you very much

@sejl hello, did you find a solution for solidworks postprocess?

@bearer said in Duet won't boot problem:

QNF

I was something else wrong with the board. The U3 gets fried again, even with no connections except the power IN.
I will buy a replacement, but really not see a point buy from duet with only 6months of warranty. This should be fixed in general.
Even shoes and heavily wearing products have 2 years. Shame.

ok, will buy and hopefully fix it, will post the result. thank you all for the outstanding help!

@bearer are the other 2 numbers important? 4403T XXXX YYYL ? cause there are many versions with different X and Y

@bearer said in Duet won't boot problem:

ut you will need a hot air station, a preheater/hotplate and some good

Have hotair, no preheat and really doing this the first time.

@bearer said in Duet won't boot problem:

A4403GEUTR

I found this one, seems to be within fast shipping reach.
https://www.tme.eu/at/en/details/a4403geutr-t/voltage-regulators-dc-dc-circuits/allegro-microsystems/

@bearer The board is more than 1 year old. I thought we have EU warranty 2 years,but apparently not.

@bearer said in Duet won't boot problem:

hat isn't on is the second best indicator; if the fuse is okay and you don't get a 5v led u3

I took a microscope and the u3 is indeed damaged.
Is there any guide how to replace it? And what is actually the part number?

Fuses are intact, how can I check the U3? Visually it looks ok.