Posts made by Mikesplane

Thank you for your help

Mike

Hi all were do I set up bed leveling in Duet???
Mike

we now have everything working, but no power to steppers. can I send my board back for you to test please.
Mike

I am still getting this message can you help please?

Mike

It has been over three months since I rebuilt my printer. I still am not working is there no easy way just to get started without all the messing I am doing?? Would it be easier to buy a new Duet as I have made one big boob some were. I don't do computers if I have to mess with changing to many things, I am sick of the message This printer only supports binary commands. when I put in M997 S1 0r 2. Is there away someone could connect to my computer and fix it for me or do I find an other controller??????

This is were I have got to,
Still don't understand what this means

READ: G90
Testing binary communication protocol...
Connected to machine!
SENT: d501015e
READ: d501015e
This printer only supports binary commands.
Disconnected.
Attempting connection at \.\COM3...
Testing plaintext communication protocol...
READ: G90
Testing binary communication protocol...
Connected to machine!
SENT: d501015e
READ: d501015e
This printer only supports binary commands.
This printer only supports binary commands.

this is what I get when I try to use M997 S1

Mike

Hi, As I thought I am going round in circles, I re built my printer from a Delta to a carcassen but can not up grade the firmware or do anything. When i first rebuilt I could connect with wifi but and only the limit switches didn't work now I have nothing. I have down loaded the firmware on the the sd card but I can't connect using usb to upload on to the board. I think it is M997 S1.
where do i go from here it is now tree weeks since the rebuild. I did warn you am OK with building but things like this stump me.

Mike

Is there any way I can buy a card with this done? I am the worlds worst at doing this sort of thing I am more of a build man than a techno man. Thanks Mike

Hi, firmware 1.7 Reprapfirmware.

mike

Hi I have had my duet 3d wifi for some years now but have changed my printer and laptop I just can' t seem to remember how to get going again. i can see a control panel I have always used but it bis a simulation and wont let me do anything please help.

Regards
Mike

Hi ,for your help, for some reaon simply 3D was not saving the Gcode.

Mike

M32 Speed Tank 3 17 v1.stl
File Speed Tank 3 17 v1.stl selected for printing
Done printing file
This what I get when I download, I have printed this file but can't do it a gain or down load it or print it.

Mike

hi it say's nothing wrong with card, i have removed the GCodes that would not down load but when I try to down load it tell me print compleate.

Mike

Hi all, I have my Duet Wifi working quite well for a month or more, but I don't know what I have done but if I use Down Loadans Print button it go's green as if it has down loaded and then say's print compleate, but nothing happens. If I Upload the G code button it go's black but just keeps telling me it is loading, I have four Gcode been down loading for over a week. is this finger trouble?? Or what have I done wrong.

Thanks

Mike

Many thanks David, all working,
Mike

Thank you for your help, I am getting some where.
I now have three "Yes" in MP and no LED if I press limit switch by hand I have NO in MP and a red LED how do I reverse this??
I have tried changing he wires round.

Mike

Thanks for that, maybe the word bounce was the wrong one to use, the X,Y,Z rattle around and it looks like the belt is slipping.

Mike

I am now moving forward with my rebuild, I click on home all, but I get what I would call "end stop bounce", X,Y,Z, all go up but bounce around then drop 5mm and all is well. how do I stop the bounce??

Mike

Hi, all what are the best stepper motors foe my DuetWifi? I dont seem to be able to find 24v ones. I have some from my old printer but are only rated at 1.4v
Mike

Like others I am not good with electric bits, can I put my Duet board under my Kossel delta mini or will the frame stop the signal? Or is there a way to extend the antenna?

Mike