Topics created by mhackney

@phaedrux said in M122 - how o disable it?:

Sounds like this could almost be related to the multiple messages being echoes back when connecting to the DWC from multiple devices. Are you perhaps accessing the DWC from a phone and a PC?

I agree Z that's the most likely explanation. The issue with serving multiple devices and one of them going offline without disconnecting is mostly fixed in the 2.0RC firmware builds.

@mhackney True, but I do not see that as a shortcoming if you're designing a printer from scratch. I got a chinese clone speed demon and did a 10,000 cycle gcode test that was approximately 12 miles of movement, they wore out and there was surface rust and grit falling off the rails. The centerline of the three bearings weren't even in the same plane; poor quality!

I did the same gcode cycle test on a genuine LM76 one and there was zero wear!

This was the smallest version and the 3 roller block with one eccentric.

One cause of a large offset is that you are homing Z using an endstop switch, and the endstop position assumed when the switch is triggered is not accurate.

If the switch is a Z Max switch, the M208 S0 Z parameter should be set to the height at which it triggers. If the switch is a Z Min switch, use a G92 Znnn command in homez.g and homeall.g to define that position.

Thanks Tony, I'm taking it off and looking at it now.

A little off topic. Can someone tell me where the gcode files are being saved on SD card 0? It goes through the download process. I have to change directories to something off root before it shows up. Another thing I am seeing is my setting - Temp additions ATX on / off are not there after a restart. I am using 1.19 +3.

hopefully my red head sacrifice takes hold and the gods will be pleased with me. we'll find out tomorrow, I don't wish to pursue any 3d printing tonight.

Interesting, I mentioned I have the same error when trying to AutoTune my bed even though I see the temp increasing when it cancels.

@watchimgo:

If anyone is looking for a Rostock Max V3 that has already been upgraded with a Duet Wifi controller and many other upgrades, you can find one right now on ebay: http://www.ebay.com/itm/-/142502541362?

Anyone know where that panelduo encasing is available? Can we share the stl?

Got it on the M552.

@dintid, I have quite a few Duet WiFi equipped printers here and use Chrome. I've not had connection issues at all in over a year (I worked with Chris H to capture network traffic to help him improve the network code about this time last year). This particular issue was odd and maybe just a fluke. Not had a problem since.

I haven't made any intentional changes to the heating control in RC2.

In fact this is already possible in DWC, I use that for exactly the same purpose. To make sure your macros show up in the desired order, name them like this:

1_Off
2_Half On
3_On

Obviously this would be easier to do if there was an easy way to rename files. I may have a look at this later today.

Well, after much testing (and some time off to do a few other projects) I've come to the conclusion that the probing issues I've had with the IR Probe are due to the fact that I use CA to fix scratches and divots in my PEI. PEI has different IR characteristics. I developed this "fix" for PEI several years ago to allow me to have a perfect first layer as that is the most visible on the fly fishing reels I manufacture. I love the idea of the IR probe but its nearly impossible to visually tell where a CA fix has been made in order to change the probing location. I've gone back to my FSR probing and everything has been working great.