Topics created by Merlin

Wow - over 24Kg of parts and tools sent, and I now have one empty shelf.
The only items I discovered that remain are:
1 x DC42 mini IR sensor v1.0 @ £10
1 x DC42 mini IR sensor v1.1 @ £10 (or was it called v2.0 ?)
First one to go gets a fully wired/crimped cable . P&P included.
Both should give 3 flashes on power up or full refund given.

T3P3 Mini Kossell carbon fibre rods with TRAXXAS rod ends assembled by me, so not as perfect as Roland's.
@ £10 plus £2.90 p&p.

E3D V6 boot with cartridge thermistor - never used.
@ £4 inc p&p.

Just been drooling over the spec of the T3P3 Kossell XL - well an old man can still dream!
TTFN

The Z value in G31 "tells" the machine how far the nozzle is away from the bed when the probe triggers. So, once you home the Z axis then do G1 Z0, the Z axis will move 0.672mm in your case and at that point, the nozzle should be just touching the bed. If the nozzle is 1.5mm above the bed, then the Z value is incorrect which means that you haven't calibrated the probe correctly. If as you say the nozzle is 1.5mm above the bed when you do G1 Z0, then you'd need to increase the Z value in G31 from 0.672 to somewhere about 2.172.

Thanks.
I'll try that and let you know how I get on.