Posts made by Marios

okay @JoergS5 .

Anyway, I would like to thank you for your response.

Cheers,
Damianos

@JoergS5 Thanks for your response.
The Stepper motors that the machine came with the printer is:
Modix 120X V3
MT-1705HS200A 1.8 degrees 2.00A
The M122 are as follow:
M122_at_78.8%.txt M122_at_26.6%.txt Final.txt
homez.g homey.g homex.g config.g

I would like to mentioned that for a reason these problem have been resolved (at least for the past two attempts of printing). Also I would like to mention that before giving a try of the past two. I re tension the belts of X,Y axis and re-install all config homing, Macro, firmware files etc.

Thanks
Damianos

Hello there,

We have a printer which came with DUET 2 WiFi controller. Recently, we've been facing issues printing with it. Basically, it all started by repetitively throwing a Stall detection error coming with a layer shift. We manage to fix it by tension the belts, but now it started failing to finish any kind of different print by rebooting the Firmware mid way through the printing procedure.
By tension a bit the belts, our X-Axis motors seem to struggle a bit when was moving around by creating a weird noise.
The parts that we are trying to print are printed with 270 and 120 degrees Celsius for Head and Bed respectively.

Is there any chance which anyone faced similar issues before? Any clue what we need to look at?

We use 2.05 Firmware Version

Regards,
Damianos