Posts made by k0s

Great:

the BLV solution works like a charm. Using the UART available on the IO.1 all 4 connections rx/tx/gnd/5v and the latest github sketch for an arduino micro or pro mini...

Ok from another user i got the information to use the io.1 instead of the io.0.
in this case the wiring would be to use in,out,5v,gnd to arduino tx,rx,5v,gnd. running M575 P2 S1 B57600 command.

i will check this later today - only question left open is to have a level shifter for the in/tx between the arduino and the io.1.

@dc42 i tried the way to use the Txd0 from the paneldue port (io.0) and sniff the data with an arduino micro - no success Claus from BLV projects told me its simply not possible with the duet3 to receive any data - which is kinda bad.

i am after their solution by adressing 3 pixel rings to show 3 status in parrallel....

i jave no clue how to solve an timed interval with m150 codes tbh...

therefore i thought the external sniffing solution would work. aside from that the project is really hot - when it comes to the neopixel status rings.

sadly i am not able to make use of the built in neopixel pin, since i lack in skills to "code" it with the m150 commands...

another question would be: why isnt it possible anymore to sniff the data simply with the RX from am arduino?????

thanks so far

@peter247 aye, yeah i finally will end up using the arduino/pro mini solution and sniff the data from the paneldue jacks then.

for now i will use a standard pixel strip and a mega - the ring and pro mini will arrive tomorrow.

I guess the most recent and up to date git will be the NeoPixelBLVmgn and might work easy.... since the repository is updated just yesterday.

@peter247 yeah and thats where i come from - i wanted a pure duet3 SBC solution and not something to be done with another raspi/arduino. I thought after 2 years it could be possible someone had a solution handy.

The BLV solution is one of the solutions i was referring to in my first post, which based on things from MartinNYHC who also setup a system with the BLV solutions - but never finished. I did contact him already a while ago...

@peter247 i had the hope to use the dedicated pin on the duet and - whoever can in this constellation - will control the 3 rings to indicate temperatues and progress...

i am not a coder at all but i could imagine in the sbc case, the rasp would send the data to the duet to drive the pixels - hence i think the duet is just running as a pure printerface

@peter247 its more about the dedicated Neopixel Pin on the mini 5+ - in a SBC environment

Hello,
i searched trough and just found half baked results for a working, lets say - 3 ring neopixel setup for a duet 3 (Mini5 + eth in my case).

I couldnt find any working and final solutions so far or i am looking at the wrong end.

I hope and wonder if someone made a working and successful solution?
Due to the fact that the Duet3 has a dedicated Neopixel pin, i wonder if someone made it to have it working with an SBC ? without the need for a seperate arduino or whatsoever -

Else it looks like i have to go down the route with the 2 year old BLV_NeoPixel integration by using an Mega and so on...

Thanks in Advance!
Dee