@dc42
Dear sir
Thanks for answering
Well, in the beginning I had the same idea.
But I didn't find out how to configure the second stepper motor for the other z axis on
https://configtool.reprapfirmware.org/Start
It shows me just X, Y, Z, E1, E2, E3.
I would definitely be interested in finding the solution of this issue and absolutely pleased if you could help me. Leading through my problem. 
Thanks a lot in advance
Best regards
Joel
@Phaedrux
G'day
Well I had thought about this kind of cable for dual z axis
Is it possible? 
Hope u can see the picture
Well actually it is one cable with two stepper motor pins on the one site and on the other site it has a pin directly to the duet 3 mainboard.
Does it work?
Thanks a lot in advance
Best regards
Joel
@Phaedrux
Hi, thanks a lot for answering
I will show u the config file as soon as possible.
I am not as fast as i wanted
First I have to put all these pins correctly to the mainboard, afterwards I have to configure it.
Let see what will happen
Unfortunately, I am not a IT specialist.
Thinks in advance
Cheers Joel
Hello everybody
I am a happy owner of a duet 3 6hc too.
I have a customized ender 3 pro with two z motors (dual z axis)
Therefore, I would like to know how I can connect the two z axis pins to my duet 3 mainboard and also to configure on this website:
https://configtool.reprapfirmware.org/Start
I am thanking you in advance
Cheers
Joe
